Foxeer Reaper Extreme VTX
Specifications
- Size: 36*27.5*8mm
- Connector: MMCX
- Display: 3LED
- Weight: 13g
- Power: 25mW/200mW/500mW/1W/1.8W
- Input: 9~36V
- Output: 5V
- Channel: 72CH
- Protocol: Tramp
LED Indicator Guide
LED | Description |
---|---|
Red | Power |
Green | Channel |
Blue | Band |
Button Operation
Channel Select Mode
Short click ?️ to enter CHANNEL setup. Only the green light is on and flashes. Select channel by short presses.
Band Select Mode
Continue to press the button for 3 seconds ⏳ to enter BAND setup. Blue LED turns on and flashes. Select band by short click.
Power Select Mode
Continue to press the button for 3 seconds ⏳ to enter POWER setup. Red LED turns on and flashes. Select power by simple short presses.
Frequency Table
Band | CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 |
---|---|---|---|---|---|---|---|---|
Band A | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
Band B | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
Band E | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 |
Band F | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
Band R | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
Band H | 5653 | 5693 | 5733 | 5773 | 5813 | 5853 | 5893 | 5933 |
Band L | 5333 | 5373 | 5413 | 5453 | 5493 | 5533 | 5573 | 5613 |
Band U | 5325 | 5348 | 5366 | 5384 | 5402 | 5420 | 5438 | 5456 |
Band O | 5474 | 5492 | 5510 | 5528 | 5546 | 5564 | 5582 | 5600 |
Power(mW) | 25 | 200 | 500 | 1W | 1.8W |
Advanced Features
Unlock Frequencies and Power Levels
Long press the "KEY" button until the Red LED (PWR) is constant on, then off, then on again. Release the button to unlock all frequencies and power levels. A flashed Red LED indicates unlocked status; a constant Red LED indicates locked status.
PIT Mode On/Off
Double-click the "KEY" button to turn PIT Mode on or off. When the Red LED (PWR) is off, PIT mode is active, outputting extremely low power. When the Red LED (PWR) is on, PIT mode is off.
Notes
If a Tramp cable is connected, the button controls will not function. The flight controller will take over frequency and power adjustments.