TOPEAK RIDECASE MOUNT HB
Secure Handlebar Mount for Smartphones
Product Compatibility
This mount is designed to fit handlebars with a diameter ranging from Ø22.2mm to Ø31.8mm.
It is suitable for smartphones with screen sizes between 4.5 inches and 6.5 inches.
Included Parts
- 5mm Allen key
- 3mm spacer
- 2mm spacer
- 5mm spacer
Assembly Options
The RIDECASE MOUNT HB offers four distinct mounting configurations, allowing for versatile positioning on your handlebar.
Installation Step: To begin assembly, insert the bolt into the deeper socket hole as illustrated.
The clamp pieces can be oriented in different ways during reassembly to achieve these four configurations.
Installing the RIDECASE MOUNT HB
Torque Specification: Tighten bolts to 5-6Nm.
Important Warning: DO NOT install the RIDECASE MOUNT HB at a bend or transition area of your handlebar where the diameter changes. This can lead to damage.
For Ø22.2mm Handlebars: When installing on handlebars with a diameter of Ø22.2mm, use the included 2mm spacer for a secure fit.
Adjustment Tip: Rotate the mount to gain better access to the adjustment bolt, making it easier to tighten.
Note on Spacers: Ensure spacers are correctly placed during installation. Do not remove spacers completely, as this may damage the handlebar.
Installing and Removing the OMNI RIDECASE
To attach your smartphone using the OMNI RIDECASE:
Pull the OMNI RIDECASE band to securely wrap around the edges of your smartphone.
To remove the smartphone from the mount, press the release button located on the RideCase Mount.
Rotation Adjustment
The mount allows for rotation adjustment, enabling you to switch between portrait and landscape viewing angles. The rotation range is approximately -90° to 90°.
Additionally, an optional sport camera mount can be attached to this unit.
Warnings and Warranty Information
General Warnings
- After attaching the OMNI RideCase to the RideCase Mount HB, verify that it is firmly secured to the mount.
- Periodically inspect all bolts and tighten them as necessary to maintain a secure connection.
Warranty
Duration: A 2-year warranty is provided, covering all mechanical components against manufacturer defects only.
Warranty Claim Requirements: To receive warranty service, you must present your original sales receipt. If a receipt is not provided, the warranty period will be assumed to start from the date of manufacture. All warranties will be void if the product is damaged due to user-caused accidents, abuse, system alterations, modifications, or if used in a manner not described in this manual.
Product Updates: Specifications and design are subject to change without prior notice.
Contact Information: For any questions or support, please contact your authorized Topeak dealer. For customer service in the USA, call 1-800-250-3068. Further information is available on the website: www.topeak.com.
