Topeak PanoComputer Bluetooth Wireless Bike Computer
Operation Manual
Operation Instructions
This manual provides instructions for the Topeak PanoComputer Bluetooth Wireless Bike Computer.
Key Buttons:
- ▶️ Short Press (短按): Select value / Confirm setting
- ⏳ Long Press (長按): Enter setting mode / Switch modes
- Ⓜ️ Mode Key (功能鍵 M): Used for navigation and mode switching.
- ⚙️ Settings Key (設定鍵): Enters setting mode.
- ↩️ Reset Key (恢復鍵): Press for 3 seconds to reset to factory settings.
Operating Modes:
The PanoComputer can operate in two modes:
- Bike Computer Mode (碼錶模式): In this mode, Bluetooth sensors transmit data directly to the PanoComputer, which displays and records it.
- Smartphone Mode (智慧型手機模式): In this mode, Bluetooth sensor data is transmitted to the Topeak PanoBike App on your smartphone, and then displayed on the PanoComputer screen.
Switching Modes: Long press the Ⓜ️ (Mode) button for 6 seconds to switch between Bike Computer Mode and Smartphone Mode.
Initial Setup Overview:
The PanoComputer can be set up either directly on the unit (Method A) or via the PanoBike App (Method B).
Diagram Description: The initial setup shows the PanoComputer unit, its mounting bracket, and a smartphone connected via Bluetooth. It illustrates the PanoComputer's role in displaying cycling data.
Transmission Methods:
- Bike Computer Mode: Sensor data goes directly to the computer.
- Smartphone Mode: Sensor data goes to the PanoBike App, then to the computer.
Setup Method A: On the Bike Computer
Steps:
- Enter setting mode by long pressing the Ⓜ️ button.
- Use short presses of the Ⓜ️ button to cycle through values.
- Long press the Ⓜ️ button to confirm a value and proceed to the next option.
Settings Available:
- Bike Selection: Choose between ?A or ?B.
- Date Setting: Set the current date (e.g., 2013-11-27).
- Time Setting: Set the current time (e.g., 16:25).
- Units Setting: Select between kilometers (km) or miles (mi).
- Wheel Circumference Setting: Input the wheel circumference (e.g., 2146 mm).
- Total Distance Setting: Set the total accumulated distance (ODO).
Diagram Description: A series of screen captures show the process of setting the date, time, units, wheel size, and total distance using the Ⓜ️ button.
Pairing Bluetooth Sensors
The PanoComputer supports pairing with optional Bluetooth sensors like speed/cadence and heart rate monitors.
Pairing Bluetooth Speed & Cadence Sensor:
- Enter setting mode.
- Navigate to "SCAN SENSOR".
- When the sensor icon flashes, rotate the crank or wheel to activate the sensor.
- The screen will display "1" upon successful pairing for ?A, or "2" for ?B.
- Press Ⓜ️ to save and return to the main screen.
Diagram Description: Shows the process of entering SCAN SENSOR mode, activating the sensor by rotating the crank, and the confirmation display "1" or "2".
Note: If no signal is found, ensure the sensor is installed correctly.
Pairing Bluetooth Heart Rate Monitor:
- Enter setting mode.
- Navigate to "SCAN SENSOR".
- When the sensor icon flashes, wear the heart rate strap.
- The screen will display "1" upon successful pairing for ?A, or "2" for ?B.
- Press Ⓜ️ to save and return to the main screen.
Diagram Description: Similar to cadence pairing, showing sensor scanning, wearing the strap, and confirmation display "1" or "2".
Note: For accurate heart rate detection, moisten the sensor area of the strap.
Sensor Connection Indicator: A Bluetooth symbol (?) appears when the computer is connected to or searching for Bluetooth sensors.
Ride Screen Display (Bike Computer Mode)
During a ride, the PanoComputer displays various data:
- Screen 1 (Current Data): Shows real-time information like speed, time, etc.
- Screen 2 (Average Data): Displays average speed, average cadence, etc.
- Screen 3 (Maximum Data): Shows maximum speed, maximum heart rate, etc.
Diagram Description: Illustrates Screen 1 showing current speed and time, Screen 2 showing average speed and distance, and Screen 3 showing max speed and ride time. It also shows the auto-return to Screen 1 after 10 seconds of inactivity.
Note: If no button is pressed for 10 seconds, the computer automatically returns to Screen 1.
Setup Method B: Via PanoBike App
This method requires downloading and installing the Topeak PanoBike App on your smartphone.
Steps:
- Open the PanoBike App and tap the "⚙️" (Setup) icon.
- Long press the Ⓜ️ button for 6 seconds to switch the computer to Smartphone Mode.
- In the app, tap "Setup" to connect the phone and computer.
- After connection, sequentially set all required fields in the app.
- Tap "Save" to complete the app settings.
- Long press the Ⓜ️ button for 6 seconds to return to Bike Computer Mode and finalize setup.
Diagram Description: Shows screenshots of the PanoBike App interface, including the "Accessories" section, "Device" settings, "Start Ride" button, and the process of connecting the bike computer and setting up bike details (wheel size, units).
Note: After basic setup, follow Method A's "SCAN SENSOR" process to pair Bluetooth sensors.
Using Substitute Screen (Smartphone Mode)
This feature allows the PanoComputer to display data from the PanoBike App on your smartphone.
Steps:
- Ensure your smartphone's Bluetooth is enabled.
- Long press the Ⓜ️ button for 6 seconds to switch the computer to Smartphone Mode.
- Open the Topeak PanoBike App and tap "START RIDE", then tap "START" to begin recording your ride.
- The ride data is synchronized and displayed on the PanoComputer screen.
- You can turn off your smartphone's screen to save battery; the app will continue to sync data to the computer.
Diagram Description: Shows the PanoComputer displaying live ride data (speed, distance, time) synced from the smartphone. It also depicts the phone screen with ride status and the PanoComputer receiving data.
Auto-Sleep/Wake:
- If the smartphone and computer connection is lost for 2 minutes, the computer will automatically enter sleep mode.
- The computer will wake up automatically if it detects the PanoBike App's Bluetooth signal, or you can wake it by a short press of the Ⓜ️ button.
Ending a Ride: Press the pause button and save the ride data.
Transferring Ride Data to PanoBike App
Ride data recorded on the PanoComputer can be transferred to the PanoBike App.
Steps:
- Ensure the computer and PanoBike App are connected and phone Bluetooth is enabled.
- Long press the Ⓜ️ button for 6 seconds to switch to Smartphone Mode.
- Open the Topeak PanoBike App and tap "History".
- Tap the "SYNC BIKE COMPUTER" button (represented by an icon). The computer's ride records will be read and transferred to the app.
- Long press the Ⓜ️ button for 6 seconds to return to Bike Computer Mode.
Diagram Description: Shows the app interface with the "History" section and the "SYNC BIKE COMPUTER" process, including progress indicators. It also shows the computer ready to transfer data.
Important Note: Ride information transferred to the PanoBike App cannot be re-read from the PanoComputer.
Installation
Mounting the Computer:
- Attach the mounting bracket to the handlebar using a 3mm hex wrench.
- Slide the PanoComputer onto the bracket until it clicks securely.
Removing the Computer:
Press the release lever on the bracket to detach the computer.
Diagram Description: Illustrates the bracket being attached to the handlebar and the computer being slid onto the bracket.
Specifications and Data
| Feature | Range | Resolution | Accuracy |
|---|---|---|---|
| Current Speed (目前速度) | 199 km/h, 199 mi/h | 0.1 km/h or mi/h | ± 1% |
| Average Speed (平均速度) | 199 km/h, 199 mi/h | 0.1 km/h or mi/h | ± 0.1% |
| Max Speed (最高速度) | 199 km/h, 199 mi/h | 0.1 km/h or mi/h | ± 0.1% |
| Distance This Ride (本次騎乘距離) | 0.00~9999.99 km or m | 0.1 km or m | ± 0.1% |
| Total Distance (總騎乘距離 - ODO) | 0.00~99999.9 km or m | 0.1 km or m | ± 0.1% |
| Ride Time (騎乘時間 - RT) | 0:00:00~99:59:59 | 1 second | ± 0.1% |
| Total Ride Time (總騎乘時間 - ART) | 0000:00~9999:59 | 1 minute | ± 0.1% |
| 12/24 Hour Format | 1:00~12:59 (12 H) / 0:00~23:59 (24 H) | 1 minute | ± 0.003% |
| Cadence (迴轉速) * | 0~199 RPM | 1 RPM | N/A |
| Heart Rate (心率) ** | 0~199 BPM | 1 BPM | N/A |
| Bluetooth (藍牙) *** | System Status | N/A | N/A |
* Cadence function requires optional Bluetooth Speed & Cadence Sensor (PanoBike Speed & Cadence Sensor).
** Heart Rate function requires optional Bluetooth Heart Rate Monitor (PanoBike Heart Rate Monitor).
*** Bluetooth symbol (?) indicates connection or search status.
Wheel Circumference Measurement:
You can set the wheel circumference either by looking up the size in the provided table or by measuring it:
- Method A: Refer to the table for tire size and corresponding circumference (e.g., 700x23C is 2096 mm).
- Method B: Measure the circumference by rolling the wheel one full rotation and marking the distance, or calculate using the formula: Circumference = Wheel Diameter x 3.14.
Diagram Description: A large table listing various tire sizes and their corresponding wheel circumferences in millimeters. Another diagram shows the formula for calculating circumference.
Default Wheel Circumference: 2096 mm. Please set your correct wheel circumference in the TOPEAK PANOBIKE APP.
Technical Specifications
| Technology: | Low-power Bluetooth® Smart technology |
| Mount: | Handlebar mount (fits 31.8mm handlebars only) |
| Battery Life (Max): | 180 hours (assuming 1 hour of daily use) * |
| Battery: | CR2032 x 1 (included) |
| Transmission Distance: | < 5 meters |
| Waterproof Rating: | IPX5 (?) |
| Weight: | 30g (excluding battery) |
| Operating Environment: | -10°C ~ 50°C (?️) |
* Battery life may vary based on usage time and initial battery condition.
Indicators and Functions
Low Battery Indicator:
When the low battery symbol (?) appears, please replace the battery soon.
Diagram Description: Shows the computer displaying the low battery indicator.
Heart Rate Alert Function:
For safety, the PanoComputer features a heart rate alert. When your heart rate exceeds the set limit, the heart icon (❤️) on the computer will turn solid to indicate this. This function requires the Bluetooth Heart Rate Monitor.
Diagram Description: Shows the computer displaying a normal heart rate and then a solid heart icon indicating the alert.
Note: The upper limit for heart rate alerts must be set within the Topeak PanoBike App.
Battery Replacement:
- Remove the battery cover as shown in the diagram.
- Replace the CR2032 battery, ensuring the positive (+) side faces up.
Diagram Description: Illustrates removing the battery cover and inserting the CR2032 battery.
Topeak PanoBike App Introduction
The Topeak PanoBike App offers comprehensive self-training and health management features. It is compatible with smartphones and can sync with the PanoComputer. Whether for professional training or casual exercise, its versatile functions provide complete sports management.
Compatibility: Compatible with iOS 5 and above, and Android OS 4.3 and above. Both apps are available for free download from the App Store and Google Play.
Diagram Description: Shows icons for the App Store and Google Play, indicating app availability.
Important Notes and Precautions
- Resetting all data will erase all stored information.
- All data settings will be cleared when using the computer for the first time or after replacing the battery.
- After battery replacement, ODO and ART data will be removed. Please record ODO and ART data before replacing the battery.
- The product is water-resistant (IPX5) and can be used in the rain, but do not use it underwater.
- Do not expose the product to direct sunlight for extended periods when not in use, as this may cause malfunction.
- Do not disassemble or modify the product yourself.
- Regularly check the installation distance between the Bluetooth cadence sensor and its magnet.
- Do not use any cleaning agents to clean the computer.
- Always pay attention to safety while riding.
- Before each ride, ensure the computer and mounting bracket are securely installed.
- Dispose of batteries according to local regulations.
Troubleshooting
| Problem | Check Item | Solution |
|---|---|---|
| No Display | 1. Is the battery depleted? | 1. Replace the battery immediately. |
| 2. Is the battery installed correctly? | 2. Ensure the positive (+) side of the battery is facing up during installation. | |
| No Speed or Incorrect Data | 1. Is the computer in setting mode? | 1. Exit setting mode and try again. |
| 2. Is the Bluetooth speed/cadence sensor and magnet gap correct? | 2. Check the sensor's manual for correct installation and re-install if necessary. | |
| 3. Is the wheel circumference setting correct? | 3. Verify the wheel circumference value and reset it. | |
| Abnormal Display | Check if computer settings are correct according to the setup steps. | Follow the setup steps to ensure correct configuration. |
| LCD Black | Was the computer exposed to direct sunlight for a long time during non-riding periods? | Place the computer in a cool, shaded area (data is not lost, no reset needed). |
| Slow Display | Is the operating environment temperature below -10°C? | As the temperature rises, functionality will gradually recover. |
| No Heart Rate Data | 1. Is the heart rate strap worn correctly? | 1. Re-check and ensure the heart rate strap is worn correctly. |
| 2. Is the heart rate strap battery depleted? | 2. Replace the heart rate strap battery immediately. |
Product Warranty
To claim warranty service, the original purchase invoice must be presented. If not provided, the warranty period will be calculated from the manufacturing date. The warranty does not cover damage caused by user negligence, improper use, unauthorized modification, system alteration, or failure to follow instructions.
Topeak reserves the right to change product specifications.
For information on Topeak products, please contact your local authorized Topeak dealer.
Website: www.topeak.com
Compatibility and Accessories
App Compatibility:
- iOS: Requires iOS 5 or later.
- Android: Requires Android OS 4.3 or later.
Both apps are available for free download.
Optional Accessories:
- RideCase Mount RX (Art No. TC1022)
- PanoComputer Mount (Art No. TPB-CM01)
