GEPRC GEP-F405-BT Flight Controller Specifications and Wiring
Product Overview
The GEPRC GEP-F405-BT Flight Controller is a critical component for FPV (First Person View) drones and RC aircraft. This document provides its technical specifications and outlines its connection scheme for various peripherals.
Specifications
| Specification | Details |
|---|---|
| Model | GEP-F405-BT |
| MCU | STM32F405RGT6 |
| Gyro | ICM42688P |
| OSD | AT7456E |
| BEC | 5V/2A |
| Blackbox | 16MB |
| Firmware | GEP-F405-BT |
| Size | 36x36mm |
| Target | GEPRC-F405-BT_REV1 |
| Input Voltage | 2-8S |
Wiring and Connections
The GEP-F405-BT Flight Controller supports connections to several essential drone components. The diagrams illustrate the typical wiring setup:
Diagram Description:
The flight controller board features multiple input and output ports. Key connections include:
- LED: For status indicators.
- ESC (Electronic Speed Controller): For motor control signals.
- Camera: For video transmission input.
- Buzzer: For audible alerts.
- Receiver: For control signals from the remote transmitter.
- GPS Module: For navigation and position data.
- DJI AIR UNIT Module: For digital video transmission.
- Analog VTX: For analog video transmission.
Colored lines in the diagrams indicate specific pin assignments between the flight controller and each peripheral. The layout is designed for easy integration into FPV drone builds.
Resources
For more detailed information, please refer to the following resources:
- [QR Code for Manual]
- [QR Code for Official Website]
- [QR Code for Facebook]
