GEPRC TAKER F405 BLS 60A V2 STACK
Product Link: https://dronexpert.eu/geprc-taker-f405-bls-60a-v2-stack-p-16209.html
Pricing & Availability
| Gross Price: | 329,00 zł |
| Net Price: | 267,48 zł |
| Availability: | Shipping 24 hours / Personal pickup |
| Manufacturer Code: | GP107164 |
| Manufacturer: | GEPRC |
Product Description
Features
- Uses mainstream STM32F405 chip.
- Equipped with the latest 42688-P gyroscope.
- 16M black box storage.
- Integrated LC filter.
- Upgraded Type-C USB interface.
- Directly plugs into the DJI Air Unit.
- Features the TAKER H60_BLS 60A 4IN1 ESC for a silky flying feel.
- Simple and reasonable installation method; the shock absorber ensures the gyroscope works very stably.
- Dual independent BEC: 12V@2.5A + 5V@3A.
Specifications
GEP-F405-HD V3 Flight Controller
- MCU: STM32F405
- IMU: ICM42688-P (SPI)
- Air Unit Connection: Direct plugging into DJI Air Unit
- Black Box: 16M onboard
- Barometer: BMP280
- Motor Outputs: M1-M6
- USB Interface: Type-C
- OSD: BetaFlight OSD with AT7456E chip
- BEC: 5V@3A, 12V@2.5A dual BEC
- Firmware Target: GEPRCF405
- Mounting: 30.5x30.5mm, 4mm holes (accommodates 3mm with silicone shock-absorbing circle)
- Input Voltage: 3-6S LiPo
- UARTs: 6 UARTs
- Power Filter: Integrated LC filter
- Weight: 7.3g
TAKER H60_BLS 60A 4IN1 ESC
- Input Voltage: 3-6S Lipo
- Ammeter: Support
- Continuous Current: 60A
- Burst Current: 65A (5 seconds)
- Supported Protocol: Dshot 150/300/600
- Size: 42x45.7mm, 30.5x30.5mm mounting holes (accommodates 3mm with silicone shock-absorbing ring)
- Weight: 14.9g
- Target: B_X_30
Includes
- 1 x Flight Controller
- 1 x ESC
- 1 x Capacitor
- 1 x DJI Air Unit Adapter Cable
- 1 x Flight Controller Adapter Cable
- 1 x XT60 Power cable
- 4 x M3*30 Screws
- 4 x M3*25 Screws
- 8 x Nylon nuts
- 8 x Silicone grommets
- 2 x sh1.0 4pin silicone cable
- 1 x Camera connection cable
Warranty Notes
This category includes equipment intended for advanced users with knowledge of electronics and electronics assembly for drones. Requires the ability to read schematics, solder electronic components, program systems, configure drones, and knowledge of the English language. Incorrect, unskilled, or improper connection of elements and/or components, as well as setting incorrect or prohibited parameters, risks equipment damage, and even fire. The warranty does not cover the above.
