Authorised Reseller DJI
ul. Ożarowska 61, Warszawa
tel. 501832306, 507273177, 501750577
Product Link: https://dronexpert.eu/stack-geprc-taker-f405-bls-50a-p-15809.html
Data current as of: 30-05-2025 08:49
Stack GEPRC TAKER F405 BLS 50A
Product Overview
Image of the GEPRC TAKER F405 BLS 50A STACK component.
Gross Price: 349.00 zł
Net Price: 283.74 zł
Availability: Currently unavailable
Manufacturer Code: GP105996
Manufacturer: GEPRC
Summary
The GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI Air Unit. It utilizes the STM32F405 chip, ICM42688-P gyroscope, and integrates a 16M black box, along with the GEP-BLS50A-4IN1 ESC, to provide a more refined control experience. This stack can be directly connected to the DJI Air Unit, eliminating the need for soldering. It features an upgraded Type-C USB connector for improved durability and reduced risk of poor contact. The system includes dual independent BECs (9V 2.5A + 5V 3A) for stable power supply to external devices.
Features
- Uses a mainstream STM32F405 chip.
- Equipped with the latest ICM42688-P gyroscope.
- 16M onboard black box storage.
- Integrated LC filter for power smoothing.
- Upgraded Type-C USB interface.
- Designed for direct connection to the DJI Air Unit.
- Features the GEP-BLS50A-4IN1 ESC for a smooth flying feel.
- Simple and robust installation method with shock absorbers for stable gyroscope operation.
- Provides dual independent BECs: 9V 2.5A and 5V 3A.
Specifications
GEP-F405-HD v2 Flight Controller
| Parameter | Value |
|---|---|
| MCU | STM32F405 |
| IMU | ICM42688-P (SPI) |
| Air Unit Connection | Direct plugging into DJI Air Unit |
| Black Box | 16M onboard |
| USB Connector | Type-C |
| OSD | BetaFlight OSD w/ AT7456E chip |
| BEC | 5V, 9V dual BEC |
| Firmware Target | GEPRCF405 |
| Size | 36.8×36.8mm, hole 30.5×30.5mm; 4mm hole becomes 3mm after using a silicone shock-absorbing circle. |
| Input Voltage | 3-6S LiPo |
| UART | 6 |
| Power Filter | Integrated LC filter |
| Weight | 7.7g |
GEP-BLS50A-4IN1 ESC
| Parameter | Value |
|---|---|
| Input Voltage | 3-6S Lipo |
| Galvanometer | Support |
| Continuous Current | 50A |
| Burst Current | 55A (5s) |
| Support Protocol | Oneshot125/Oneshot42/Mulishot modes/Dshot 150/300/600 |
| Size | 42.9×39.7mm, hole 30.5×30.5mm; 4mm hole becomes 3mm after using the silicone shock-absorbing circle. |
| Weight | 13.7g |
| Target | G_H_30 |
Includes
- 1 x Flight Controller
- 1 x ESC
- 1 x Capacitor
- 1 x DJI Air Unit Adapter Cable
- 1 x Flight Controller Adapter Cable
- 1 x XT60 Power cable
- 4 x M3*30 Screws
- 4 x M3*24 Screws
- 8 x Nylon nuts
- 8 x Silicone grommets
- 2 x sh1.0 4pin silicone cable
- 1 x Camera connection cable
Warranty Information
The equipment in this category is intended for advanced users with knowledge of electronics and for those who assemble drones. The ability to read schematics, solder electronic components, program circuits, configure drones, and knowledge of the English language is required. Incorrect, unskilled, or improper connection of elements and/or components, as well as setting incorrect or prohibited parameters, risks damage to the equipment, and even fire. The warranty does not cover the above.
Team: dronexpert.eu
