Signature Design by Ashley D402_024 Assembly Instructions
Model: D402_024
Brand: Signature Design by Ashley
Date: February 2022
Important Assembly Notes
Assembly requires two or more people. Do not tighten any bolts until all bolts have been started.
Original Notes:
- English: NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!
- Spanish: NOTA: ESTA UNIDAD DEBE SER ARMADA POR 2 O MAS PERSONAS ! NO APRIETE NINGUN PERNO HASTA QUE TODOS ESTEN EN SU LUGAR!
- French: REMARQUE: LE MEUBLE DOIT ETRE ASSEMBLÉ PAR DEUX PERSONNES OU PLUS. NE BLOQUER AUCUNE VIS TANT QUE VOUS N'AVES PAS COMMENCE A TOUTES LES DEMARRER!
Parts Identification
Refer to the diagrams for visual identification of parts.
Component Parts:
- Part A: 3 units
- Part B: 3 units
- Part C: 4 units
- Part D: 1 unit
Dimensions indicated for some hardware: 1/4" x 20mm, 4mm.
Hardware Pack:
The hardware pack contains parts labeled A, B, C, and D. Note: Hardware is stored underneath the table.
Note on Parts: The parts and label index are separated for different units. The parts are located inside the box.
Assembly Steps
Follow these steps carefully to assemble your product.
Step 1
Instruction indicates the use of 4 units of Part C with 1/4" x 20mm hardware.
Visual Description: Diagram shows hardware being prepared or indicated for connection.
Step 2
Diagram shows the assembly process where components labeled C and D are being connected. Multiple instances of C and D are depicted being joined together using hardware.
Visual Description: Diagram illustrates the joining of frame or structural components.
Step 3
Diagram shows the completed assembly of the product.
Visual Description: Final assembled furniture piece is depicted.
