D120-530 Assembly Instructions
Brand: Signature Design by Ashley
Important Safety Information
General Safety Guidelines:
- Always use proper tools.
- Follow assembly steps in order; do not skip any.
- Check packing materials carefully for loose small parts. Contact the retailer for missing parts; do not use substitute parts.
- Periodically check that all connectors (bolts, screws, etc.) are tight.
- Keep instructions for future reference.
- Handle glass or mirrors with extreme care to avoid severe injury if broken. Never handle large glass or mirrors alone.
- When assembling products with electrical cords (lamps, lights, motors, power strips), ensure the cord is unplugged before assembly, avoid twisting or pinching the cord, and do not use an extension cord with this product.
- Note: During charging, the device and charger may heat up; this is normal. If the battery gets hotter than usual, the device may stop charging.
- WARNING: Remove all metal objects like coins and keys from the charging surface and remove any metal objects attached to your mobile phone before placing the device on the charging surface. Some mobile devices or cases may attract metal objects.
- When assembling shelves or entertainment centers, use a step ladder; do not stand on lower shelves to assemble upper shelves.
- Do not sit or stand on tables, including end tables, cocktail tables, and dining tables, as tables are not engineered or designed to support the weight of a person.
- If assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.
Manufacturer Disclaimer: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note on Appearance: The unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Base | 1 |
| B | Gas Lift Post | 1 |
| C | Handle/Lever | 1 |
| D | Base Plate | 1 |
| E | Mounting Bracket | 1 |
| F | Seat | 1 |
| G | Washer | 1 |
| H | 1/4"x3/4" Bolt | 8 |
| J | 1/4"x3/4" Bolt | 4 |
| M | Bracket | 1 |
Assembly Note: Unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started!
Assembly Steps
-
Step 1
Insert the gas lift post (B) into the base (A). Place the washer (G) onto the top of the gas lift post.
-
Step 2
Attach the base plate (D) to the underside of the base (A) using four 1/4"x3/4" bolts (H) and one bracket (M).
-
Step 3
Attach the mounting bracket (E) to the gas lift post assembly using four 1/4"x3/4" bolts (H) and one bracket (M).
-
Step 4
Place the seat (F) onto the top of the assembled gas lift post.
-
Step 5
Secure the seat (F) to the gas lift post using four 1/4"x3/4" bolts (J) and one bracket (M).
-
Step 6
The assembly is now complete. You have successfully assembled the bar stool.
