Signature Design by Ashley D440-024,224,324 Industrial Adjustable Height Counter Stool Assembly Instructions
Model Numbers: D440-024, D440-224, D440-324
Brand: Signature Design by Ashley
Important Safety Notice
READ CAREFULLY BEFORE BEGINNING ASSEMBLY!
- Suitable for indoor use (25°C).
- Always use proper tools.
- Follow the assembly steps in order. Do not skip any steps.
- Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product. DO NOT USE SUBSTITUTE PARTS.
- Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
- Keep the instructions for future reference.
- Some assembly may involve attaching glass or mirrors. Be very careful handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors alone.
- When assembling products with electric cords (lamps, lights, etc.), always ensure the electrical cord is unplugged before assembly and be careful not to twist the cord during assembly.
- When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder.
- Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support a person's weight.
- Where assembly instructions state that two or more people are required, do not attempt assembly alone, as there is a risk of injury.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the furniture shall be destroyed.
Note: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
This document also contains important safety information in Spanish, French, and Chinese.
Parts List
Note: Unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started!
| Identifier | Description | Quantity |
|---|---|---|
| A | Round Top | x1 |
| B | Central Pole/Column | x1 |
| C | Base Frame with Legs | x1 |
| D | Bolts (1/4"x18mm) | x4 |
| E | Allen Wrench (4mm) | x1 |
Diagram Description: The diagram shows the individual parts labeled A through E. Part A is the circular seat. Part B is the vertical adjustable pole. Part C is the circular base with four legs. Part D are four bolts. Part E is an L-shaped Allen wrench.
Assembly Instructions
Important: Do not tighten any bolts until all bolts have been started!
Step 2: Insert the central pole (B) into the designated opening on the base frame (C). An inset shows a close-up of the pole fitting into the base.
Step 3: Attach the round top (A) to the top of the central pole (B). Secure the base frame (C) to the bottom of the central pole (B) using the four bolts (D). An inset shows a close-up of the tightening mechanism at the base of the pole, indicating it should be rotated to secure. The final diagram shows the assembled adjustable height counter stool.
Contact & Support
For replacement parts or assistance, please contact:
- Email: RTAParts@ashleyfurniture.com
- Website: www.ashleyfurniture.parts
- Phone: 1-844-966-0809
