D743-01 Assembly Instructions

Brand: Signature Design by Ashley

Important Safety Notice

Always use proper tools. ?

Follow the assembly steps in order. Do not skip any steps. ▶️

Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS. ⚠️

Periodically check to ensure that all connectors (bolts, screws, etc.) are tight. ⚙️

Keep the instructions for future reference. ?

Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself. ⚠️

When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly. ?

When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves - use a step ladder. ?

Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person. ?

Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury. ?

Note: Ashley Furniture Industries, LLC disclaims any liability for damages or injuries which may occur due to failure to properly follow assembly instructions, properly assemble the product, or properly use the product.

Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.

(The original document also contained safety information in Spanish, French, and Chinese.)

Parts List

Ax1: Curved support rail
Bx1: Seat assembly base
Cx2: Leg mounting bracket
Dx4: 5/16" x 80mm bolt
Jx4: 5/16" x 57mm bolt
Fx2: 5/16" x 38mm bolt
Gx10: 5/16" bolt
Hx10: 5/16" washer
Kx1: Allen wrench ?
Mx1: 10x40mm bolt

Assembly Instructions

Important Note: Unit should be assembled by two or more people. ? Do not tighten any bolts until all bolts have been started. ⚠️

Step 1: Initial Frame Assembly

Attach part A (curved support rail) to part B (seat assembly base) using bolts G and washers H. Attach part C (leg mounting bracket) to part B using bolt M (10x40mm). Use the Allen wrench K ? for tightening.

Diagram description: Shows the seat base (B) with curved supports (A) attached to its sides, and leg mounting brackets (C) attached to the underside. Bolts G and washers H are used for A-B connection, and bolt M for C-B connection.

Step 2: Attaching Legs

Attach the main frame structure to the legs. Use four bolts D (5/16" x 80MM) and four washers H (5/16") to secure the frame to the leg assembly. Use the Allen wrench K ?.

Diagram description: Shows the frame assembly being connected to the legs using bolts D and washers H, tightened with Allen wrench K.

Step 3: Securing Leg Brackets

Secure the leg mounting brackets. Attach part C (leg mounting bracket) to the frame using bolts D and G, and washers H. Use the Allen wrench K ?.

Diagram description: Shows leg mounting brackets (C) being attached to the main frame using bolts D, G, and washers H, tightened with Allen wrench K.

Step 4: Final Tightening

Level the chair and tighten all bolts securely with the Allen wrench K ?. ✔️

Diagram description: Shows the completed chair, indicating the final tightening of all fasteners.

Contact & Support

For replacement parts, contact: RTAParts@ashleyfurniture.com

Visit: www.ashleyfurniture.parts

Customer Service: 1-844-966-0809

	Signature Design by Ashley D743-02 Assembly Instructions This document provides essential safety information and step-by-step assembly instructions for the Signature Design by Ashley D743-02 furniture item. It includes details on tools, parts, and assembly procedures to ensure a safe and correct setup.
	Signature Design by Ashley D736-124 Chair Assembly Instructions Step-by-step assembly guide for the Signature Design by Ashley D736-124 chair, featuring a parts list, safety warnings, and detailed instructions for a smooth setup.
	Signature Design by Ashley D449-01/02 Chair Assembly Instructions Concise and SEO-optimized assembly instructions for the Signature Design by Ashley D449-01/02 chair, including safety warnings, parts list, and assembly steps.
	Signature Design by Ashley B060-65 Assembly Instructions Comprehensive assembly guide for the Signature Design by Ashley B060-65 furniture item, featuring safety precautions, a detailed parts inventory, and step-by-step visual instructions for assembly.
	Signature Design by Ashley D589-01 Assembly Instructions Comprehensive assembly instructions and safety guidelines for the Signature Design by Ashley D589-01 dining chair. Includes parts list, step-by-step guidance, and contact information for support.
	Signature Design by Ashley D677-01 Chair Assembly Instructions Step-by-step assembly instructions and safety guidelines for the Signature Design by Ashley D677-01 chair. Includes parts list and textual descriptions of assembly diagrams.
	Signature Design by Ashley Accent Chair Assembly Instructions (Models A3000063-A3000069) Comprehensive assembly guide for Signature Design by Ashley accent chairs, models A3000063 through A3000069. Includes safety warnings, parts list, and step-by-step instructions for assembling the furniture.
	Signature Design by Ashley P226-113 Assembly Instructions and Safety Guide Comprehensive assembly instructions and safety notices for the Signature Design by Ashley P226-113 furniture set, detailing parts, tools, and step-by-step assembly procedures for chairs and a table.