Manuals+

VINGLI Pool Fence Instruction Manual

Important Safety Information

Please read these instructions carefully and ensure they are followed at all times.

For assistance or questions regarding your order, contact the VINGLI support team at support@vingli.com. VINGLI aims to provide friendly and hassle-free service.

Product Overview

The VINGLI pool fence is designed to enhance safety around swimming pools. The installation process involves several key steps, from preparing the site to securing the fence sections.

Diagram illustrating the VINGLI pool fence structure, showing multiple vertical poles with mesh fencing between them, anchored into the ground. A measurement of '6cm' is indicated at the base of one pole, suggesting the depth or spacing.

Preparation

Required Tools

Before beginning installation, gather the following tools: an electric drill, chalk, hammer, and tape measure.

An assortment of tools laid out on a concrete surface, including a rolled-up black mesh fence, an electric drill, a long measuring tape, a hammer, and a chalk marker, all necessary for the pool fence installation.

Installation Steps

  1. Step 1: Measure and Mark

    Measure and determine the desired distance between the pool fence and the pool edge. Decide where the opening of your pool fence will be located. Mark the initial pole placement on the pool deck using chalk.

    An overhead view shows a person measuring a concrete pool deck with a long metal ruler, marking the spot for the first fence pole with chalk.

  2. Step 2: Mark Hole Locations

    Using chalk, draw the locations for all holes around the entire perimeter of the pool where the fence will be installed.

    A close-up view shows a person kneeling on a concrete surface, using a chalk marker along a metal ruler to draw a line, indicating where holes will be drilled for the pool fence.

  3. Step 3: Drill Holes

    Drill holes around the entire pool perimeter using a drilling guide. All holes should be drilled to a depth of 4 inches (approximately 10 cm) and at a direct 90-degree angle to the deck surface.

    A person holds an electric drill with a long bit, drilling into a concrete surface next to a metal guide, ensuring a 90-degree angle.

  4. Step 4: Insert Plastic Feet

    After drilling, clear any drilling dust from the holes. Insert the plastic "feet" into the drilled holes. If the feet are difficult to fit, tap them gently into place with a hammer, taking care not to break them.

    Two sequential images show the process of inserting plastic feet. The first image shows a hand holding a gray plastic foot above a drilled hole in concrete. The second image shows a hand using a hammer to gently tap the plastic foot into the hole.

  5. Step 5: Install Fence Sections

    Insert each pool fence section into the plastic feet. Fasten each section to the next using the provided "safety latch" mechanism.

    Two images illustrate the fence assembly. The first image shows the bottom of a black mesh pool fence pole inserted into a gray plastic foot on a concrete surface. The second image shows two sections of the black mesh pool fence being connected by a yellow safety latch, with hands securing the connection.

PDF preview unavailable. Download the PDF instead.

G26000992 G26001610 pool fence-instruction ?v=1654940262 Acrobat Distiller 9.3.3 (Windows)

Related Documents

Preview VINGLI 18 Feet Inground Pool Cover Reel: Assembly and User Manual
This comprehensive manual guides users through the assembly and operation of the VINGLI 18 Feet Inground Pool Cover Reel. It includes a detailed parts list, step-by-step instructions, and tips for optimal use, ensuring easy management of your pool cover. Contact VINGLI support at support@vingli.com for assistance.
Preview VINGLI Inground Pool Cover Reel Assembly and Installation Manual
Comprehensive instruction manual for assembling and installing the VINGLI Inground Pool Cover Reel, including parts list, step-by-step guides for various pool types, and maintenance tips.
Preview VINGLI Inground Pool Cover Reel Assembly Instructions
Comprehensive assembly instructions for the VINGLI Inground Pool Cover Reel, detailing parts, steps, and usage tips for easy installation and operation.
Preview VINGLI Metal Twin Bunk Bed Assembly Instructions and Safety Guide
Comprehensive assembly instructions and safety warnings for the VINGLI Metal Twin Bunk Bed. Learn how to safely build and use your bunk bed, including parts lists and step-by-step guidance.
Preview Vingli Safety Gate Installation Manual
Comprehensive installation manual for the Vingli Safety Gate (Model G666-G), including assembly instructions, replacement parts, usage guidelines, care, and maintenance tips for safe child use.
Preview VINGLI Storage Cabinet Assembly Guide - Easy Installation Steps
Detailed assembly instructions for the VINGLI storage cabinet, including parts list, safety warnings, and step-by-step installation guide. Ensure safe and proper setup of your VINGLI furniture.
Preview VINGLI 10 ft. x 20 ft. Canopy Tent Assembly Instructions
Detailed assembly instructions for the VINGLI 10 ft. x 20 ft. Easy Pop Up Canopy Tent, including parts list and step-by-step guidance for setup and takedown. Features mesh sidewalls and a wheeled carrying bag.
Preview VINGLI 5 FT Porch Swing Assembly Instructions
Step-by-step assembly guide for the VINGLI 5 FT Porch Swing, including a detailed parts list and important assembly notes. Learn how to easily set up your VINGLI outdoor swing.