Introduction
This document provides comprehensive instructions for the DEXTER 800ETC1-20035.1 tile cutter. It details the intended use of the machine, crucial safety guidelines, a description of its components, technical specifications, assembly procedures, operating instructions, and maintenance recommendations. The manual is designed to ensure user satisfaction and safe operation of the tile cutter.
Key Features and Safety
- Intended Use: Designed for standard cutting of small to medium-sized tiles (glazed, ceramic, etc.). Not suitable for cutting wood or metal.
- Safety First: Emphasizes reading all safety warnings, using personal protective equipment (eye protection, hearing protection, dust masks), maintaining a clean work area, and avoiding operation when fatigued or under the influence of substances.
- Electrical Safety: Advises on proper grounding, avoiding wet conditions, and using appropriate extension cords.
- Operational Safety: Includes guidance on proper handling, avoiding forced operation, ensuring correct assembly of safety features, and proper maintenance to prevent accidents.
Product Specifications
- Motor Power: S1: 800W; S2: 900W (10 min)
- No-load Speed: 3000 min⁻¹
- Power Supply: 230 V ~ 50 Hz
- Cutting Capacity: Up to 610 mm length, 35 mm thickness at 90°, 27 mm at 45°.
- Diamond Cutting Wheel: ø200xø25.4 mm
Assembly and Operation
The manual provides step-by-step instructions for assembling the tile cutter, including unfolding the base chassis, mounting the cooling water pump, and attaching transport aids. It also details the operation of the on/off switch and guides users through making 90° cuts, 45° diagonal cuts, and 45° longitudinal cuts (jolly cuts). Instructions for replacing the diamond cutting wheel are also included.
Maintenance
Regular maintenance is essential for the longevity and safe operation of the tile cutter. Users are advised to perform visual checks of the power cable, plug, water pump, and cutting wheel before each use. Detailed cleaning and maintenance procedures are outlined in the manual.
