DEXTER DRILL 300W
Model: 300SD2-EA.2
Brand: DEXTER
Guarantee: 5 Years
EAN Code: 3276007550849
Introduction
Thank you for purchasing this DEXTER 300W electric drill. We recommend reading this manual carefully for installation, usage, and maintenance to ensure your complete satisfaction.
If you require assistance, the team at your retailer is available to help.
Safety Information
⚠️ General Danger / Caution
Power Off: ? [power-off] - Ensure the drill is disconnected from the power supply before performing any maintenance or changing accessories.
Power On: ? [power-on] - Connect the drill to the power supply for operation.
Assembly and Bit Installation
Step 1: Open the Chuck
Hold the drill firmly. Rotate the front chuck collar counter-clockwise to open the jaws and loosen the grip.
[Diagram: Hand rotating chuck collar counter-clockwise]
Step 2: Insert Drill Bit
Insert the desired drill bit or accessory into the opened chuck jaws.
[Diagram: Drill bit inserted into chuck]
Step 3: Tighten the Chuck
Rotate the front chuck collar clockwise to securely tighten the jaws around the drill bit. Ensure it is firmly held.
[Diagram: Hand rotating chuck collar clockwise]
Usage Instructions
1. Starting and Speed Control
Press the trigger switch to start the drill. The speed is controlled by the pressure applied to the trigger: light pressure for slow speed (?), increasing pressure for higher speed (?).
[Diagram: Trigger with speed indicators ? and ?]
2. Forward and Reverse Rotation
Use the directional switch located above the trigger to change the rotation direction:
- Forward: Move the switch to the top position [forward symbol].
- Neutral/Lock: Move the switch to the middle position [lock symbol ?].
- Reverse: Move the switch to the bottom position [reverse symbol ⬅️].
[Diagram: Directional switch with forward, neutral/lock, and reverse positions]
3. Drilling into Materials
The DEXTER 300W drill is suitable for drilling into wood and metal. Ensure you use the correct type and size of drill bit for the material and task.
Wood:
Use wood drill bits.
[Diagram: Drill bit in wood with ✔️]
Metal:
Use metal drill bits. Consider using a lubricant for smoother drilling.
[Diagram: Drill bit in metal with ✔️]
Masonry (e.g., Brick, Concrete):
❌ This drill is not designed for masonry drilling. Use a hammer drill with appropriate masonry bits for these applications.
[Diagram: Drill bit attempting to drill into brick with ❌]
Torque Settings: Adjust the torque collar (numbered ring near the chuck) to match the material and screw size. This helps prevent over-tightening or stripping screws. The "CLAC" sound indicates the clutch engaging.
[Diagram: Torque collar adjustment with +/- symbols]
4. Drill Bit Size
This drill is compatible with drill bits ranging from 0.8 mm to 10 mm in diameter.
[Diagram: Drill bit with 0.8 mm and 10 mm indicators]
Recycling and Disposal
This product is recyclable. If it can no longer be used, please take it to a waste recycling center.
For more information, visit: www.quefairedemesdechets.fr
[Recycling symbol ♻️, PAP symbol, CE mark]
Warranty and Manufacturer Information
This product comes with a 5-year guarantee.
Manufactured in: China
Distributors include:
- ADEO Services, France
- LEROY MERLIN ROMANIA SRL, Romania
- Adeo South Africa (PTY) LTD, South Africa
- ТОО «Леруа Мерлен Казахстан», Kazakhstan
Serial Number Example: 1051420107052201380841
