Product Overview
This document provides instructions for the Dexter Multi-Purpose Tool, model 260MT3-QC.5, with a power rating of 260W.
The tool is designed for various tasks including cutting, sanding, and scraping.
EAN CODE: 3276007131796
Available Languages for Tool Name:
- FR: Outil multifonction 260W.
- ES: Herramienta multifunción 260W.
- PT: Multi-ferramenta 260W.
- IT: Utensile multifunzione 260 W.
- EL: Εργαλείο πολλαπλών χρήσεων 260 W.
- PL: Narzędzie wielofunkcyjne 260 W.
- UA: Багатофункціональний інструмент 260 Вт.
- RO: Unealtă multifuncțională 260 W.
- EN: Multi-purpose tool 260 W.
Introduction
Thank you for purchasing this product. We recommend that you read the installation, user, and maintenance instructions carefully. This product has been designed to ensure your complete satisfaction. If you require assistance, the team at your retailer is on hand to help you.
Product Contents
The package includes the following accessories:
- A: The Dexter multi-purpose tool.
- B: Wood & Metal cutting blade.
- C: Wood cutting blade.
- D: Segment saw blade.
- E: Scraper blade.
- F: Sanding pad.
- G: Sandpaper sheets (2x 120gr, 2x 80gr, 1x 40gr).
Safety Information
General Danger: ⚠️ Attention danger / Atención: Peligro / Atenção perigo / Attenzione pericolo / Προσοχή κίνδυνος / Uwaga niebezpieczeństwo / Увага! Небезпечно! / Atenţie, pericol / Caution danger.
Power Off: Ensure the tool is disconnected from the power supply before performing any maintenance or accessory changes. ??
Power On: Connect the tool to the power supply to begin operation. ?✅
Recommended Safety Gear: Always wear appropriate personal protective equipment (PPE) when operating the tool:
- Hearing protection: ?
- Safety glasses: ?
- Dust mask: ?
- Gloves: ?
Note: ❌ indicates incorrect practice, ✅ indicates correct practice.
Assembly and Safety Instructions
- Step 1: Attach accessory. Insert the accessory into the tool head and lock it in place. ?
- Step 2: Insert the accessory (B) into the tool head.
- Step 3: Secure the accessory by tightening the screw with the provided tool. ? ⬇️
- Step 4: Safety check. Ensure all safety precautions are followed before operation.
Usage Instructions
- Step 5: Adjust speed. Use the speed dial to select the desired speed, ranging from 15,000 to 22,000 RPM. ? (low speed) to ? (high speed).
- Step 6: Operate the tool. Use the trigger and lever to control the tool's operation. ⬆️ indicates activation.
- Step 7: Cutting wood. Use the appropriate blade (C) for cutting wood.
- Step 8: Cutting pipes. Use the segment saw blade (D) for cutting pipes.
- Step 9: Scraping. Use the scraper blade (E) for scraping tasks.
- Step 10: Sanding. Attach the sanding pad (F) and sandpaper (G) for sanding applications.
- Step 11: Cutting wood (detail). Perform cutting operations on wood.
- Step 12: Remove accessory. Unlock the accessory by pressing the lever and pulling it out. ? ⬆️
Maintenance
Cleaning: Clean the tool as needed. ?
Recycling and Warranty
This product is recyclable. If it cannot be used anymore, please take it to a waste recycling centre.
Warranty: 3-year guarantee.
Distributors:
- ADEO Services - 135 Rue Sadi Carnot - CS 00001, 59790 RONCHIN - France
- LEROY MERLIN ROMANIA SRL - Strada Icoanei 11-13, Sector 2, Bucuresti, Romania
- Leroy Merlin Greenstone Store, Corner Blackrock Street and Stoneridge Drive, Greenstone Park Ext 2, Edenvale, 1610 Johannesburg, Gauteng, South Africa
- «Леруа Мерлен Казахстан» ЖШС, Республика Казахстан, 050000, Алматы К., Конаев кошесі, 77, «ParkView» БО, 6., 07 оф.
Certifications: CE, EAC, PAP.
Made in China.
