HIMMELSÖ Gazebo

Important Information

Before starting assembly, please read all instructions carefully.

Note on Screws: As floor materials vary, screws for fixing to the floor are not included. For recommendations on suitable screw systems, contact your local specialised retailer.

Tools required: Ladder ?, Hammer ?.

If you encounter difficulties or have questions, consider contacting IKEA customer support ?.

Step 1

Attach the base connectors to the bottom of the vertical poles. Use 4x screws (10092978) and the Allen key (130445).

Step 2

Connect the horizontal beams to the vertical poles. This involves inserting the beams into the connectors.

Step 3

Connect the corner pieces to the ends of the horizontal beams.

Step 4

Continue connecting corner pieces to the structure.

Step 5

Attach the angled support pieces to the corner connectors. This is done at each of the four corners, using 1x bolt (10068736) and 1x washer (10060581) per connection, tightened with the Allen key (130445).

Step 6

Assemble the roof frame sections. Two sections are assembled in this step.

Step 7

Connect the assembled roof frame sections to the main structure. This is done at each of the four main connection points, using 2x screws (10092978) and 2x washers (10060581) per connection, tightened with the Allen key (130445).

Step 8

Attach the feet to the base of the vertical poles. Ensure correct orientation; do not attach as shown in the crossed-out diagram ❌.

Step 9

Attach the central roof hub to the top of the structure. Use the wrench (124441) to tighten the hook bolt (10067553) into the nut (10060754). Maximum load capacity for hanging items is 5 kg (11 lbs) ?.

Step 10

Attach the roof support arms to the central hub. There are 8 arms in total.

Step 11

Connect the roof support arms to the outer frame. Push until you hear a "Click!".

Step 12

Continue connecting the remaining roof support arms to the outer frame. Push until you hear a "Click!".

Step 13

Attach the main canopy cover. Ensure it is correctly positioned. Secure by pushing the attachment points until they "Click!". ⚠️ Be cautious when working at height.

Step 14

Secure the gazebo to the ground using the ground stakes (10061993). Hammer them into the ground at the base of each pole. ⚠️ Ensure the structure is stable and secure before use.

Step 15

Drape the canopy cover over the frame. Ensure it is centered and aligned.

Step 16

Secure the canopy cover to the frame by engaging the attachment points. Push until they "Click!".

Step 17

Fasten the edges of the canopy cover to the frame using the provided clips or ties. There are 8 fastening points.

Step 18

Final check of the assembled gazebo. Ensure all parts are securely fastened and the structure is stable.

Final Notes

The canopy can be adjusted or removed as needed.

Curtains (if applicable) can be attached to the frame.

Refer to the HIMMELSÖ manual for specific details on curtain attachment.