Yeelight Smart LED Ceiling Light
Installation Instructions
Step 1: Unpack the packaging, take out the ceiling light, slide the locking switch inwards, and remove the base.
Diagram Description: The diagram shows the components of the ceiling light: a connection device/connecting part, a locking switch, a front view of the light fixture's base, an opening for the cartridge, a mounting hole for a self-tapping screw, the reverse side of the light fixture's base, an opening for the cord, and the base itself.
Important Warning: To avoid electric shock before installation, disconnect the power supply. Install step-by-step following the instructions. Incorrect installation may lead to falling, fire, electric shock, and other accidents.
Step 2: Securing the Base
Method 1 (Recommended): Thread the power cord through the cord opening. Use a self-tapping screw to secure the base to the ceiling. Ensure the base is securely fastened.
Method 2: Check the integrity of the two mounting points of the light fixture's junction box. After checking, thread the cord through the cord opening. Use metric screws to secure the base with the junction box to the ceiling. Ensure the base is securely fastened.
Included Hardware:
- 2 x Dowels
- 2 x Self-tapping screws
- Metric screws
- Remote Control (not included in standard configuration)
Power Cord Connection
Step 3: Connecting the Power Cord. According to the following diagram, strip the wire insulation by 8-9 mm.
Diagram Description: The diagram shows how to insert the power cord into the terminal block. To remove the cord, press the red button on the terminal block.
Step 4: Attaching the Light Fixture. Take the ceiling light with both hands on the sides. Do not press the light-emitting surface. Align it with the base and gently push both sides of the light fixture into the base. After a click, the installation is complete. Before releasing your hands, ensure the latches on both sides of the light fixture are fully engaged.
Function Descriptions
- ON: Turn on light
- OFF: Turn off light
- M: Adjust color temperature
- Night Light: Night mode
Intelligent Control
1. Scan the QR code or download the Yeelight mobile application.
2. Ensure the ceiling light is powered on. Follow the instructions within the app for usage. Ensure you have Wi-Fi access and a continuous internet connection.
This product is compatible with the Mijia intelligent platform. It can be controlled via the “Mijia” app and supports the MIUI system, allowing integration with other Mijia intelligent platform products.
Remote Control Instructions
(The remote control is not part of the standard configuration and must be purchased separately)
To pair the remote control with the Yeelight LED ceiling light for use in the same room, turn on the ceiling light. Within 60 seconds of powering on, simultaneously press and release the OFF+M buttons on the remote control. The blinking indicator light on the remote signifies that pairing is in progress. Wait for the ceiling light to flash, indicating that pairing is complete.
Factory Reset
Using the power switch, turn the light on and off continuously 5 times (each on/off cycle lasting 2 seconds). After 5 seconds, the ceiling light will automatically restart and restore factory settings.
* If the ceiling light is used in a new network environment, it is necessary to restore factory settings and then reconfigure the network connection.
Product Specifications
- Product Model: YLXD01YL
- Color Temperature Range: 2700K - 6500K
- Operating Temperature: -10 - +40 °C
- Operating Humidity Range: 0% - 85% RH
- Service Life: Approximately 25000 hours
- Power Factor: 0.9
- Rated Power: 28 W
- Rated Power Consumption: 220V - 50/60 Hz 0.127 A
- Compatibility: Android 4.4 & iOS 8.0 and later versions
- Wireless Connection: WI-FI IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE
Product Features
- Adjustable Color Temperature
- Adjustable Brightness
- Night Light - Moonlight Mode
- High Color Rendering Index (CRI)
- Dust Protection (IP rating)
- Smart Location
- Control via Mobile Phone
- Software Update
Hazardous Substances Content
| Part Name | Hazardous Substances | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr VI) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|---|
| Ceiling Light Fixture | X | O | O | O | O | O | O |
| Screw | O | O | O | O | O | O | O |
| Dowel | O | O | O | O | O | O | O |
| Base | O | O | O | O | O | O | O |
| Packaging Box | O | O | O | O | O | O | O |
| Remote Control | O | O | O | O | O | O | O |
Note: 'O' indicates that the content of the hazardous substance in this part is below the limit specified in GB/T 26572. 'X' indicates that the content of the hazardous substance in this part exceeds the limit specified in GB/T 26572. This table is compiled based on the regulation SJ/T 11364.
Important Safety Precautions
- Before use, ensure that the electrical voltage matches the operating voltage of this product. Using an incorrect voltage may lead to product damage or a potentially hazardous situation.
- Do not modify the LED modules or disassemble the product yourself.
- During operation, the light fixture may generate heat. Ensure adequate surrounding air convection for heat dissipation.
