Product Introduction
This document provides comprehensive details for the Yeelight Crystal Sensor Ceiling Light Mini, model YLXD09YL.
Product Components and Accessories
The Yeelight Crystal Sensor Ceiling Light Mini comprises the following main components:
- Lampshade: The primary light-diffusing cover.
- Silicone sleeve: A protective sleeve, likely for cable entry.
- Wiring terminal: Connection point for electrical wiring.
- Cover of terminal box: Enclosure for the wiring terminals.
- Backboard: The mounting structure that attaches to the ceiling.
Included accessories for installation:
- Expansion tube (x2): For securing the light to the ceiling.
- Self-tapping screw (x2): Used for mounting the backboard.
- Silicone pad (x2): Likely for cushioning or sealing.
⚠️ IMPORTANT SAFETY INFORMATION: To prevent electric shock, ensure the power supply is disconnected before commencing installation. Adhere strictly to the provided installation instructions. Failure to install correctly may lead to electric shock, fire hazards, or the lamp falling. For safety, it is recommended to have installation and maintenance performed by qualified electrical personnel.
Installation Instructions
1. Drill holes
1. Carefully unpack the product and remove the ceiling light. Detach the lampshade by rotating it counterclockwise.
2. Open the terminal box cover by loosening the screw. Remove any temporary trial cable. Position the backboard against the ceiling at the desired location, mark the positions for the mounting holes using a marking pen, and then remove the backboard.
3. Drill two holes on the ceiling using a Ø6mm drill bit. The recommended drilling depth is a minimum of 40mm (≥40mm). Insert the provided expansion tubes into the drilled holes.
Diagram Description: Visual representation showing the backboard with indicated points for drilling holes on the ceiling. It also depicts the insertion of expansion tubes into the prepared holes.
2. Fix backboard
1. Guide the power cord through the silicone sleeve located on the backboard.
2. Secure the backboard to the ceiling using the self-tapping screws and silicone pads.
Diagram Description: An illustration demonstrating the process of threading the power cord through the backboard's silicone sleeve and subsequently fastening the backboard to the ceiling structure with screws.
⚠️ WARNING: After completing the installation, verify that the backboard is securely fixed. An improperly secured backboard poses a risk of the lamp falling.
3. Connect power cord
1. Carefully strip approximately 6-8mm of insulation from the power cord. Connect the live wire, neutral wire, and ground wire to their respective terminals on the ceiling light. Tighten the terminal screws securely and then reattach the terminal box cover using the provided screws.
Diagram Description: A visual guide showing the power cord with the end stripped to expose the wires (6-8 mm). It illustrates the correct connection of the live, neutral, and ground wires to the designated terminals within the light fixture.
⚠️ WARNING: This product requires proper grounding for safe operation.
4. Install lampshade
1. Attach the lampshade to the ceiling mount by rotating it clockwise until it is securely in place.
Diagram Description: An illustration showing hands gently rotating the lampshade clockwise to connect it to the main fixture.
Basic Parameters
| Model No. | YLXD09YL |
|---|---|
| Product Name | Yeelight Crystal Sensor Ceiling Light Mini |
| Luminous flux | 670 lm |
| Color temperature | 5700 K |
| Rated input | 100–240 V ~ 50/60 Hz 0.08 A |
| Rated power | 10 W |
| Operating temperature | -10 °C to +40 °C |
| Operating humidity | 0–85 % RH |
| Power factor | 0.5 |
| Sensitive time | 60 s (rated) |
| Induction range | (120 cm ≤ R ≤ 200 cm) |
Product Features
☀️ Light sensitivity: Detects ambient light levels.
?♂️ Motion sensitivity: Activates based on detected movement.
? Anti-Insects: Designed to prevent insect ingress.
✨ High color rendering Index (CRI): Ensures accurate color representation.
Notes
- Upon initial power-on, the ceiling light enters a test mode. This self-test concludes if no human activity is detected during the initial phase.
- The accuracy of the induction range may be influenced by factors such as user height, indoor temperature, and other environmental conditions.
- The specified induction range (R) is based on a storey height of 290cm, used as the reference detection distance.
Safety Precautions
- Before use, confirm that the applied voltage matches the product's specified working voltage. Using an incorrect voltage can lead to product damage and safety hazards.
- The integrated LED light source is not replaceable. Do not attempt to disassemble the product. If the light source fails, the entire light fixture must be replaced.
- The ceiling light generates heat during operation. Ensure adequate cross-ventilation to facilitate efficient heat dissipation.
- Installation of the ceiling light should be carried out by a qualified electrician. All wiring connections must comply with IEEE electrical standards and relevant national regulations.
EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. hereby declares that the Yeelight Crystal Sensor Ceiling Light Mini complies with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU. The complete text of the EU declaration of conformity is available upon request from: Yeelight Germany GmbH, Flurweg 11, 82402 Seeshaupt.
WEEE Disposal and Recycling
Correct Disposal of this Product: This marking signifies that the product should not be disposed of with general household waste across the EU. To prevent potential harm to the environment or human health resulting from uncontrolled waste disposal, please recycle the device responsibly. This promotes the sustainable reuse of material resources. To return your used device, utilize local return and collection systems or contact the retailer where the product was purchased. This ensures environmentally sound recycling.
CE Marking - Verification of Conformity
The product features the CE marking, indicating its conformity with applicable EU directives. A verification of conformity document, issued by WALTEK Services (Fujian) Co., Ltd., confirms that the product meets specified test standards and regulatory requirements.
About Yeelight
Yeelight is recognized as a world-leading smart lighting brand, dedicated to the in-depth exploration of smart interaction, distinctive design, and enhancing the overall lighting experience. The company consistently strives to set new high standards within the lighting industry. Yeelight offers a diverse portfolio of smart home lighting products, including fixtures for home furnishings, table lamps, ambient lighting solutions, and intelligent lighting control systems. Furthermore, Yeelight is committed to continuously integrating state-of-the-art technologies and professional optical research into its product development.
Should you find our products satisfactory, we encourage you to like our official fan page on Facebook, share your experience by rating our products in our online store, or provide a review on Google.
