Yeelight Arwen Ceiling Light

Product Description

This section describes the Yeelight Arwen Ceiling Light, its components, and included accessories.

• Front View of Light Body: The main circular light fixture.
• Reverse View of Light Body: Shows the rear of the light, including the lock switch.
• Base Plate: The mounting structure that attaches to the ceiling. It features:
  • Self-tapping screw mounting hole
  • Wiring hole
  • Holder mounting hole
  • Threading hole

Included Accessories:

• Self-tapping screw × 2
• Expansion tube × 2
• Metric screw × 2
• Remote control × 1

Mounting Instructions

Follow these steps carefully to mount the Yeelight Arwen Ceiling Light. Always prioritize safety.

Step 1: Prepare the Light

Open the package and take out the ceiling light. Push the lock switch inward and remove the base.

Step 2: Mount the Base

Important Safety Note: To avoid any danger, please ask an electrical professional to perform mounting or maintenance. Before mounting, make sure to disconnect the power supply to prevent electric shock. Mounting should be performed in strict accordance with the instructions. Improper mounting is liable to cause accidents such as fall, fire, and electric shock.

Method A (Recommended):

Use an impact drill with a 6 mm diameter to make two mounting holes with a length of ≥ 25 mm in the wall. Insert the expansion tube into the mounting hole. Thread the power cord through the wiring hole. Use self-tapping screws to fix the base on the ceiling and verify it is securely mounted.

Method B:

Check that the two mounting points on the light box are intact. Thread the power cord through the wiring hole. Use metric screws to fix the base on the light box on the ceiling and verify it is securely mounted.

Step 3: Wiring

The wiring hole is suitable for power leads with a cross-sectional area of 1.5-2.5 mm². Strip the power cord by 11-13 mm. Connect the neutral (N), live (L), and ground (?) wires to the corresponding terminals on the ceiling light. A solid or stranded hard wire is used as the power lead. When unplugging the power cord, press the red button on the wiring hole first, then pull it out. Arrange the power cord neatly and check for firm wiring. This product must be grounded.

Step 4: Attach the Light Body

Hold both sides of the light body with both hands, being careful not to press the light-emitting surface. Align the light body with the fixed base and gently push both sides upwards simultaneously. Mounting is complete when you hear a "click" sound.

Step 5: Final Check

After finishing mounting, always rotate the light body left and right and pull the light body up and down to ensure that the lock switch is locked in place. Always check for proper mounting after you have finished. Improper mounting may cause the product to fall.

Connect to Yeelight App

This product can be controlled via the Yeelight App and configured to interact with other Yeelight products. It also supports control through Mi Home, Google Home App, and Amazon Alexa.

Download App:

Search for "Yeelight" in an app store or scan the QR code (QR code excluded from output) to download and install the App.

Add Device:

• Go to the Yeelight App homepage and click the [+] (plus symbol) in the upper right corner to add your device.
• Proceed with the configuration as instructed on the App.
• Once a device is added successfully, it can be found in the device list.

Note: App update procedures may differ from descriptions. Follow the on-app instructions.

Restore to Factory Settings:

Use the wall switch to turn the ceiling light on and off seven times consecutively. (Turn off the ceiling light, wait two seconds, turn it on, wait two seconds – this counts as one time). The ceiling light will then start breathing and automatically restart after five seconds, restoring factory settings. When using the light in a new network environment, you need to restore factory settings and connect to the network again.

How to Connect and Control the Remote Control

Ensure the remote control and ceiling light are in the same room. Turn on the light and perform the following within 60 seconds: Press the "OFF" and "M" buttons on the remote control simultaneously, then release them. The indicator light on the remote control will flash, indicating connection is being made. Connection is successful when the light flashes cyclically.

Remote Control Functions:

• ON Button: Short press to turn on main light; Long press to turn on mood light.
• OFF Button: Short press to turn off main light; Long press to turn off mood light.
• Color Temperature Button: Short press to adjust the color temperature of the main light; Long press to adjust the color of mood light.
• Mode Button (M): Short press to switch between daylight and moonlight mode; Long press to turn on/off automatic color switch for mood light.
• Brightness Up Button (+): Short press to increase brightness for main light; Long press to increase brightness for mood light.
• Brightness Down Button (-): Short press to reduce brightness for main light; Long press to reduce brightness for mood light.

Product Features

• Colored mood light: Offers customizable mood lighting.
• Adjustable color temperature: Allows adjustment of white light color temperature.
• Adjustable brightness: Brightness can be controlled.
• Cozy moonlight: Provides a soft moonlight mode.
• CRI High color rendering index: Ensures colors appear natural under the light.
• Quick setup: Easy installation and configuration.
• Smart interaction: Integrates with smart home ecosystems.
• Firmware upgrade: Supports over-the-air firmware updates.

Specifications

• Model: YLXD013-B (for 450C version), YLXD013-C (for 550C version)
• Power Factor: 0.9
• Operating Temperature: 25° C
• Operating Humidity: 0–85% RH
• Color Temperature: 2700–6500 K
• Rated Input: 220–240V ~ 50/60Hz Max. 0.23A
• Rated Power: 50 W (450C version), 50 W (550C version)
• Compatibility: Android 4.4 & iOS 9.0 or above
• Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE
• Operating Frequency: 2412-2472 MHz (Wi-Fi), 2402-2480 MHz (BT)
• Maximum Output Power: 17.21 dBm (Wi-Fi), 5.08 dBm (BT-LE)

Precautions

• Ensure the voltage is consistent with the ceiling light's operating voltage before use. Mismatched voltage may damage the light and cause safety hazards.
• Do not replace the light source yourself. It should only be replaced by the manufacturer, after-sales service, or a qualified electrician.
• The ceiling light generates heat during operation; ensure it is well-ventilated for heat dissipation.
• Controlling the light via app or remote does not cut off electricity. Do not touch, replace, or disassemble the light when powered this way, as it may cause electric shock, injury, or death.
• Installation requires a qualified electrician, and wiring must comply with IEEE or national standards.
• Install the ceiling light in a stable location to prevent it from dropping or falling off.
• Under normal use, maintain a separation distance of at least 20cm between the antenna and the user's body.
• For indoor use only.

Declarations and Disposal

CE EU Declaration of Conformity

Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YLXD013-B/YLXD013-C is in compliance with Directive 2014/53/EU.

WEEE Disposal and Recycling

Products bearing the WEEE symbol are waste electrical and electronic equipment. They should not be mixed with unsorted household waste. Protect human health and the environment by handing over waste equipment to a designated collection point for recycling, appointed by government or local authorities. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about collection points.