Product Description
This section details the components and appearance of the Yeelight Ceiling Light C2001.
Light Body Views
- Front view: A circular light fixture.
- Reverse view: Shows the mounting mechanism, including a lock switch.
Base Plate Details
The base plate includes the following connection and mounting points:
- Self-tapping screw mounting hole
- Wiring hole
- Holder mounting hole
- Threading hole
Included Accessories
- 2 x Self-tapping screws ?
- 2 x Expansion tubes ?
- 2 x Metric screws ?
- 1 x Remote control ?
Mounting Instructions
Follow these steps for safe and correct installation.
- Prepare the Light: Open the package and remove the ceiling light. Push the lock switch inward and detach the base.
- Mount the Base:
- Method A (Recommended): Use a 6 mm impact drill to create two mounting holes in the wall, each at least 25 mm deep. Insert the expansion tubes ? into the holes. Thread the power cord through the wiring hole. Secure the base to the ceiling using the self-tapping screws ?, ensuring it is firmly mounted.
- Method B: Confirm that the two mounting points on the light box are intact. Thread the power cord through the wiring hole. Use metric screws ? to fix the base onto the light box on the ceiling, verifying a secure mount.
- Wiring: The wiring hole is suitable for power leads with a cross-sectional area of 1.5-2.5 mm². Strip the power cord by 11-13 mm. Connect the neutral (N), ground (D), and live (L) wires to their respective wiring holes. (When unplugging, press the red button on the wiring hole first, then pull out the wire.) Arrange the power cord neatly for firm wiring. ⚠️ This product must be grounded.
- Attach Light Body: Hold both sides of the light body with both hands, taking care not to press the light-emitting surface. Align the light body with the fixed base and gently push both sides upwards simultaneously. Mounting is complete when a "click" sound is heard.
- Secure the Mount: After mounting, rotate the light body left and right and pull it up and down to ensure the lock switch is securely engaged. (Always check for proper mounting after installation. Improper mounting may cause the product to fall.)
⚠️ Safety First:
- To avoid danger, consult an electrical professional for mounting or maintenance.
- Before mounting, disconnect the power supply to prevent electric shock ⚡. Mounting must strictly follow instructions; improper mounting can lead to accidents like falls, fire, or electric shock.
Connectivity and Control
This product can be controlled via the Yeelight App and integrated with other smart home systems.
Yeelight App Control
- Download App: Search for "Yeelight" in your app store or scan the provided QR code to download and install the app.
- Add Device: Navigate to the Yeelight App homepage, tap "+" in the upper right corner, and follow the on-app instructions to add and configure your device.
- Note: App interface and procedures may change with updates. Always follow the current app instructions.
Smart Home Integration
The light is also compatible with Mi Home, Google Home App, and Amazon Alexa. Download and configure these apps as instructed to control the light.
Apple HomeKit Smart Control
- Open the Home app on your iPhone or iPad.
- Tap "Add Accessories" and follow the instructions to scan the QR code (found on the manual or junction box) or enter the 8-digit setup code.
- Requirements: A Wi-Fi network with internet access is required (5 GHz networks are not supported). For HomeKit control, iOS 9.0 or above is recommended.
- The HomeKit setup code is essential. Keep it safe, as it's needed again if the product is reset to factory settings. If the manual is lost, the QR code or setup code can be found on the junction box.
iPad and iPhone are trademarks of Apple Inc.
Settings and Operation
Restore to Factory Settings
Use the wall switch to turn the ceiling light on and off five times consecutively (turn off, wait 2 seconds, turn on, wait 2 seconds for one cycle). The light will indicate it's resetting by breathing, and will restart automatically after five seconds, with factory settings restored. This is necessary when connecting to a new network environment.
Using the Remote Control
Ensure the remote control and ceiling light are in the same room. Turn on the light. Within 60 seconds, press and release the "OFF" and "M" buttons simultaneously on the remote. The remote's indicator light will flash, signifying connection in progress. A successful connection is confirmed when the light flashes cyclically.
Remote Control Functions:
- ON: Light on ?
- OFF: Light off ⚫
- Adjust color temperature: ☀️
- Daylight/moonlight mode: ?
- Increase brightness: ➕
- Reduce brightness: ➖
Specifications
- Model: YLXD036 for C2001C450, YLXD037 for C2001C550
- Power Factor: 0.9
- Operating Temperature: 25° C
- Operating Humidity: 0–85% RH
- Color Temperature: 2700–6500 K
- Rated Input: 220-240V ~ 50/60Hz Max. 0.23A
- Rated Power: 50 W (81 × 1 W/LED module) for C2001C450, 50 W (84 × 1 W/LED module) for C2001C550
- Compatibility: Android 4.4 & iOS 9.0 or above
- Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE
- Operating Frequency: 2412-2472 MHz (Wi-Fi), 2402-2480 MHz (BT)
- Maximum Output Power: 17.21 dBm (Wi-Fi), 5.08 dBm (BT-LE)
Product Features
- Adjustable color temperature ☀️
- Adjustable brightness ➕/➖
- Cozy moonlight ?
- High color rendering index (CRI)
- Voice control ?️
- Quick setup ⚙️
- Smart interaction ?
- Firmware upgrade ⬆️
Precautions
- Ensure voltage consistency with the ceiling light's operating voltage to prevent damage and safety hazards.
- Do not replace the light source yourself; only the manufacturer, after-sales service, or a qualified electrician should perform this.
- The ceiling light generates heat; ensure good ventilation for heat dissipation.
- The light can be controlled by app or remote (sold separately). Turning off via app/remote does not disconnect power; do not touch, replace, or disassemble while powered, as this may cause electric shock ⚡, injury, or death.
- Installation requires a qualified electrician, and wiring must comply with IEEE electrical standards or national standards.
- Install in a stable location to prevent dropping or falling.
- Maintain a separation distance of at least 20cm between the antenna and the user's body during normal use.
- For indoor use only ?.
- The light source shall only be replaced by the manufacturer, service agent, or a similarly qualified person.
EU Declaration of Conformity
Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YLXD036/YLXD037 is in compliance with Directive 2014/53/EU.
WEEE Disposal and Recycling
Products bearing the WEEE symbol ♻️ are waste electrical and electronic equipment. Do not mix with household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling. Correct disposal and recycling help prevent potential negative consequences. Contact the installer or local authorities for more information about collection points.
