Fiamma Carry-Bike CL Motorhome Bike Rack

Product Overview

The Fiamma Carry-Bike CL is a robust bicycle carrier designed for motorhomes, allowing you to transport up to 3 bicycles. It has a maximum load capacity of 50 kg and weighs 5.6 kg. Ensure compatibility with your vehicle before installation.

Approximate dimensions when mounted: 128 cm length, 40-50 cm height adjustment, 60 cm width, 32 cm depth.

Parts Identification

The package includes various components for assembly:

• Main Frame: Labeled 'A'
• Upper Support Arms: Labeled 'B', 'C', 'D'
• Bike Holders: Labeled 'E'
• Fixing Brackets: Labeled 'F'
• Various Screws and Fasteners: Labeled 'G', 'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X', 'Y'

Refer to page 2 for a detailed exploded view of all parts.

Installation Instructions

Follow these steps carefully for proper installation:

1. Step 1: Locate Mounting Points: Identify the strongest points on your vehicle's rear wall or door where the brackets (F) will be attached. Ensure these points can support the load.
2. Step 2: Assemble Frame: Connect the main frame components (B, C, D) using the provided screws and nuts (e.g., N, P, X).
3. Step 3: Attach Bike Holders: Mount the bike holders (E) onto the frame, securing them with components like J and K.
4. Step 4: Secure Frame to Vehicle: Attach the assembled frame to the vehicle's designated mounting points using screws (W) and nuts (Q, Y). Ensure the vehicle wall/door is sufficiently solid.
5. Step 5: Attach Bike Support Arms: Mount the bike support arms (T) to the frame using screws (Y, Q). This step may involve drilling, with recommended drill bit sizes like Ø 6.2 mm or Ø 6.5 mm.
6. Step 6: Secure Bikes: Place bicycles onto the support arms and secure them using the provided straps and holders (U). Ensure bikes are evenly distributed, with heavier bikes closer to the vehicle wall for stability.
7. Step 7: Final Adjustments: Make final adjustments to the bike holders (E) and straps. Ensure all fasteners are tightened appropriately, leaving a small gap (approx. 2mm) where specified (e.g., between fork and tube).

Refer to pages 5-8 for detailed visual guidance on each installation step.

Usage and Safety Instructions

• Weight Distribution: Ensure bikes are loaded evenly, with heavier bikes positioned closer to the vehicle wall. Do not exceed the maximum load capacity of 50 kg.
• Speed Limit: Adhere to local speed limits and traffic laws. Adjust speed according to traffic conditions and the load. A maximum speed of 130 km/h is indicated.
• Vehicle Compatibility: Verify that your vehicle's rear wall or door is strong enough to support the carrier and bikes.
• Driving Precautions: Be aware of the carrier's presence, especially when reversing or parking. Use additional mirrors if rear visibility is limited.
• Maintenance: Periodically check the tightness of all fasteners and the condition of rubber parts and straps. Replace worn components immediately.
• Bike Handlebars: It is recommended to rotate bicycle handlebars to prevent damage to the vehicle wall. Fiamma is not responsible for such damage.
• General Warnings: Do not overload the carrier. Do not sit on the carrier. Ensure bikes are securely fastened.

Refer to pages 4, 7, 10, and 11-17 for detailed safety and usage information.

Accessories

Fiamma offers various accessories to enhance your Carry-Bike system, including:

• RAIL PREMIUM series (S, XL, FAT BIKE)
• RAIL QUICK PRO
• BIKE-BLOCK PRO S / SD
• BIKE FRAME ADAPTER
• PLASTIC SIGNAL / ALU SIGNAL
• CABLE-LOCK
• BIKE COVER S / PREMIUM S
• KIT SUPPORT BAR
• EASY DRY
• ULTRA-BOX series (320, 360, 500)
• CARGO BACK / KIT FRAME CARGO BACK
• FIXING-BAR Carry-Bike

Refer to page 18 for a list of accessories and their item numbers.

Warranty

Fiamma provides a warranty in accordance with local laws and regulations of the country where the product was purchased, covering defects in materials and manufacturing. Contact your local dealer for warranty claims.

Refer to page 19 for detailed warranty information in multiple languages.

Contact and Support

For any problems or questions regarding installation, usage, or spare parts, please contact your local Fiamma dealer. You can also visit the official Fiamma website for more information and technical drawings.

Website: fiamma.com

Refer to page 9 for dealer contact information and page 20 for company details.