Edifier TWS1 Pro 2 True Wireless Noise Cancellation In-Ear Headphones

Power ON/OFF

The headphones power on automatically when the charging case is opened. They power off automatically when placed in the charging case and the case is closed.

Pairing

Initial Pairing:

• Power on when the case is opened.
• Select "EDIFIER TWS1 Pro 2" in your device settings to connect.

Manual Pairing Mode:

• Power on when the case is opened.
• Press and hold the button on the charging case for 3 seconds. The white and red LEDs will blink rapidly.
• Select "EDIFIER TWS1 Pro 2" in your device settings to connect.

Note: For subsequent use, the earbuds will auto-connect to the device used last time.

Reset

To reset the headphones:

• Power on when the case is opened.
• Press the button on the charging case 3 times. The indicator blinks white until reset is completed.
• Once reset, the headphones enter pairing mode automatically.

Status Indicator

Open the charging case or press the button on the case once to check the charging case battery status.

Battery Status:

• Red LED on for 2 seconds, then off: Low battery.
• Red LED on: Charging.
• LED off: Fully charged or no power.

Controls

The touch panels on the earbuds allow for control of music playback, calls, and noise cancellation.

Left Touch Panel

• Tap 3 times: Switch between ANC modes (High Noise Cancellation, Ambient Sound, Noise Cancellation Off).
• Tap 2 times: Play/Pause music or Answer/End calls.
• Press and hold for 2 seconds: Activate voice assistant.

Right Touch Panel

• Tap 3 times: Increase volume.
• Tap 2 times: Play/Pause music or Answer/End calls.
• Press and hold for 2 seconds: Activate voice assistant.

Note: Customized controls are available via the Edifier Connect App. Images are for illustrative purposes only and may differ from the actual product.

Hazardous Substances Information

This section details the presence of hazardous substances in the product, complying with RoHS directives.

Notes:

• Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence.
• Note 2: "0" indicates that the percentage content of the restricted substance does not exceed the reference percentage value of presence.
• Note 3: "-" indicates that the restricted substance corresponds to an exemption.

Compliance Statements

NCC Statement: This equipment has been certified as low-power radio frequency equipment. Unauthorized modification of frequency, power, or original design characteristics is prohibited. Use must not affect flight safety or interfere with lawful communications. If interference occurs, cease use and improve until no interference is present. Lawful communication refers to radio communication operated according to telecommunications management laws. Low-power radio frequency equipment must tolerate interference from lawful communication or industrial, scientific, and medical equipment.

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IC Statement: CAN ICES-003(B)/NMB-003(B).

FCC ID: Z9G-EDF204

IC: 10004A-EDF204

Declaration for EU: Hereby, Edifier International Limited declares that the radio equipment type EDF200114 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.edifier.com/int/eu-doc.html

Frequency Band: 2400MHz - 2483.5MHz

RF Power Output: ≤10 dBm (EIRP)

Input Power: 5V = 200mA (Earbuds), 5V = 1A (Charging case)

Edifier Connect App

Enhance your experience by downloading the Edifier Connect App. Scan the QR code or search for "Edifier Connect" on the App Store or Google Play to customize controls, update firmware, and access additional features.