Edifier NeoBuds Pro 2

1. Power ON/OFF

Indicator: Power ON when the case is opened. Power OFF when placed in the case and the case is closed.

Note: If there is no Bluetooth connection for 2 hours after powered on, the earbuds will power off automatically.

2. Pairing

Indicator: 3s

Pairing for the first time

1. Earbuds placed in the case and keep the case open. LEDs will be lit one by one from left to right in a circulating pattern.
2. Select "EDIFIER NeoBuds Pro 2" in Bluetooth device settings to connect. LEDs will blink twice and then turn off when successfully.

Pairing for a new device

1. Earbuds placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. LEDs will be lit one by one from left to right in a circulating pattern.
3. Select "EDIFIER NeoBuds Pro 2" in Bluetooth device settings to connect. LEDs will blink twice and then turn off when successfully.

Fast Pair (Phone with Android 6.0+)

Open the charging case and keep the case next to the phone (make sure the phone is unlocked and Bluetooth® is on), and tap the pairing notification when the pop-up window appears to connect effortlessly.

Note: For subsequent use, the earbuds will automatically connect to the device used last time.

3. Reset

Indicator: x3

1. Earbuds placed in the case and keep the case open.
2. Press the button on the case 3 times to re-enter left & right connection and clear pairing records. LEDs will be lit one by one from sides to center in a circulating pattern and then will blink twice when successfully.
3. Select "EDIFIER NeoBuds Pro 2" in Bluetooth device settings to connect. LEDs will be lit one by one from left to right in a circulating pattern, then will blink twice and turn off when successfully.

4. Auto-pause music

Remove one or both earbuds while listening to music, the music will automatically pause; to resume the music, insert the earbud(s) back in the ear(s). This function can be disabled or configured in "wearing detection" settings via Edifier Connect App.

5. Charging

Earbuds

Place earbuds in the charging case and keep the case closed.

Charging case

1. Please connect the case to power source with the included Type-C charging cable for charging.
2. LEDs are steady lit when charging and off when fully charged.

Note: Please do not charge the earbuds when there is sweat or other liquids inside the charging port, which may damage the earbuds.

Indicator: Input: 5V ⎓ 200mA (Earbuds) / 5V ⎓ 1A (Charging case)

6. Controls

Left Tap Panel:

• [Double tap]: ? (Music Play/Pause)
• [Triple tap]: ⏭️ (Next Track)

Right Tap Panel:

• [Double tap]: ? (Volume Up)
• [Double tap]: ? (Volume Down)
• [Triple tap]: ⚙️ (Voice Assistant / Mode Switch)

Notes:

• Default sound control: high noise cancellation / ambient sound.
• Default sound modes: music mode / game mode / spatial audio.
• Images are for illustrative purposes only and may differ from the actual product.
• Download Edifier Connect App for more customizable control settings.