Edifier X3 Pro

1. Power ON/OFF

Take out or place both earbuds into the charging case to power them on or off.

2. First Pairing

Once powered on, the earbuds will automatically enter Bluetooth pairing mode.

Select "EDIFIER X3 Pro" from your device's Bluetooth list to connect.

Illustration: Shows earbuds being taken out of a charging case, followed by a phone screen displaying Bluetooth settings with "EDIFIER X3 Pro" available for connection.

3. Pairing for a New Device

Once powered on, the earbuds automatically reconnect to the last device used.

If the connection fails, the earbuds will enter Bluetooth pairing mode after 10 seconds.

If manually disconnected, the earbuds will enter pairing mode immediately.

To pair with a new device, select "EDIFIER X3 Pro" from the new device's Bluetooth list.

Illustration: Shows earbuds in pairing mode, with two devices (A and B) attempting to connect.

4. Multipoint Connection

The earbuds can connect to two devices simultaneously.

1. While the earbuds are paired with Device A, disconnect them from Device A. This will automatically activate Bluetooth pairing mode.
2. Go to Device B's settings and select "EDIFIER X3 Pro" from the product list to connect.
3. Go back to Device A's Bluetooth list and select "EDIFIER X3 Pro" to reconnect.

Note: For subsequent use, the earbuds will automatically reconnect to the two most recently used devices.

Illustration: Depicts a sequence of connecting to two different devices (A and B) using Bluetooth.

5. Reset

To perform a factory reset:

1. Take the earbuds out of the charging case.
2. Quickly tap both touch areas 5 times. The reset process will complete within 8 seconds.

Illustration: Shows earbuds being removed from the case, followed by a hand tapping the touch area.

6. Charging

Input: 5V ⎓ 200mA (Earbuds), 5V ⎓ 1A (Charging Case)

Note: Ensure the USB-C port is completely dry before charging.

Illustration: Shows the USB-C port on the charging case and the earbuds being placed inside.

7. Controls

The earbuds feature touch controls on both the left (L) and right (R) earbuds.

Left Earbud (L):

• Double Tap (x2): Play/Pause music, Answer/End call.
• Triple Tap (x3): Switch Active Noise Cancellation (ANC) modes (ANC On, ANC Off, Transparency).

Right Earbud (R):

• Double Tap (x2): Play/Pause music, Answer/End call.
• Triple Tap (x3): Activate Voice Assistant (e.g., Siri, Google Assistant).

Note: The default sound control setting is Active Noise Cancellation (ANC) On.

Illustration: Diagrams showing the touch-sensitive areas on the earbuds and indicating double-tap and triple-tap actions.