Edifier TWS1 Pro 2
True Wireless Noise Cancellation In-Ear Headphones
1. Power ON/OFF
Indicator:
- Power ON when the case is opened.
- Power OFF when placed in the case and the case is closed.
2. Pairing
Indicator:
1. Power ON when the case is opened.
2. Press and hold the button on the case for 3 seconds. The white and red LED will blink rapidly.
3. Select "EDIFIER TWS1 Pro 2" in your device settings to connect.
1st Pairing
- Power ON when the case is opened. White and red LED will blink rapidly.
- Select "EDIFIER TWS1 Pro 2" in your device settings to connect.
Note: For subsequent use, the earbuds will auto-connect to the device used last time.
3. Left & Right Connection/Reset
Indicator:
- Power ON when the case is opened.
- Press the button on the case 3 times. The indicator blinks white until reset is completed.
- Once the headphones are reset, they enter pairing mode automatically.
4. Status Indicator
Indicator:
Open the case or press the button on the case 1 time to check the charging case battery status.
Battery Status:
- Low battery: Red LED on for 2 seconds
- Charging: Red LED on
- Fully charged: LED off
5. Controls
Left Touch Panel
Right Touch Panel
- ANC Setting switches between "High Noise Cancellation", "Ambient Sound", and "Noise Cancellation Off".
- Customized controls via Edifier Connect App.
Note: Images are for illustrative purposes only and may differ from the actual product.
For more information, please visit our website: www.edifier.com
