Altronix T3MK77F16SD Kit: Access and Power Integration Solution for Mercury

Product Overview

The Altronix T3MK77F16SD kit is a comprehensive solution for integrating Mercury access control boards with Altronix power supplies. It comprises a Trove3 enclosure and a TM3 Altronix & Mercury backplane, equipped with two 24VDC @ 10A power supply/chargers, two dual-input eight (8) PTC-protected output access control modules, two voltage regulators, and two dual-input eight (8) PTC-protected output power distribution modules.

This kit is designed to accommodate various combinations of Mercury boards, supporting up to sixteen (16) doors within a single enclosure. The Trove system simplifies board layout and wire management, thereby reducing installation time and labor costs.

Compatibility: The kit is also compatible with numerous Mercury partners, including AccessNsite, Avigilon, BadgePass, BluBox, Feenics, Genetec, Identicard, IMRON, Johnson Controls, Kastle, Keri Systems, Lenel/S2, LockState, Maxxess, Midpoint Security, NLSS, Open Options, Panasonic i-PRO MonitorCast, Quintron, RS2, S2 Security, Schneider Electric, and Vanderbilt.

Key Features:

• Two (2) 24VDC power supply/chargers (eFlow104NB).
• Accommodates various Mercury controllers: LP1501, LP1502, LP2500, LP4502, MR16IN, MR160UT, MR50, MR52, MR62e, MUX8.
• Convenient knockout configuration for various conduit sizes (2", 1.5", 1.25", 1", 3/4").
• 16 AWG galvanized steel backplane for simplified board layout and wire management.
• Enclosure accommodates up to four (4) 12VDC/12AH batteries.
• Supervision: Includes AC Fail and Low Battery/Battery Presence supervision.
• Agency Listings: UL294 - Access Control System, CUL CAN/ULC s319-05 - Electronic Access Control Systems, CE European Conformity.
• Warranty: Lifetime Warranty.

Specifications

Two (2) Power Supplies (eFlow104NB)

• Input: 120VAC, 60Hz, 9A max.
• Input Fuse: 6.3A/250V.
• Output: 24VDC @ 10A.
• Auxiliary: 1A (unswitched).
• Protection: Overvoltage protection, filtered and regulated.
• Battery Charging Capacity: Up to 12AH/12VDC (4 within enclosure), up to 40AH/65AH (requires separate enclosure).
• Type: Sealed lead acid or gel type.
• Failover: Upon AC loss, instantaneous.
• Fire Alarm Disconnect: Supervised (Latching or non-latching, 10K Resistor).
• Supervision: Form "C" contacts for AC Failure and Battery.
• Low DC Power Shutdown: Shuts down DC output if battery voltage drops below 70-75% (for 24V units), preventing deep battery discharge.
• Indicators (LED): AC Input (120VAC present), DC Output (24VDC present), Battery (Discharged or not connected).

Two (2) Voltage Regulators (VR6)

• Input: 24VDC from eFlow104NB.
• Output Voltage: 12VDC.
• Current: 6A continuous, surge suppression.
• Indicators (LED): Input (24VDC present), Output (Powered).

Two (2) Dual Input Power Distribution Modules (PDS8CB)

• Input Voltage: 24VDC from eFlow104NB and 12VDC from VR6.
• Input PTCs: 9A.
• Outputs: 12VDC and/or 24VDC.
• Output PTCs: 2.5A.
• Indicators (LED): DC Output (Green for 12VDC, Red for 24VDC).

Two (2) Dual Input Access Power Controllers (ACMS8CB)

• Input Voltage: 24VDC from eFlow104NB and 12VDC from VR6.
• Input PTCs: 9A.
• Outputs: Eight (8) selectable 12VDC - 24VDC independently controlled outputs or eight (8) independently controlled Form “C” relay outputs. Supports Fail-Safe/Fail-Secure, 28VAC/VDC @ 2.5A rated relays, and auxiliary power outputs.
• Output PTCs: 2.5A.
• Indicators (LED): Red LEDs indicate outputs triggered (relays energized). Blue LED indicates FACP disconnect is triggered. Individual voltage LEDs (Green for 12VDC, Red for 24VDC).

Physical and Environmental

• Dimensions (H x W x D): Enclosure: 36.12" x 30.125" x 7.06" (917.5mm x 768.1mm x 179.3mm). Shipping: 40.75" x 35.25" x 12" (1035.1mm x 895.4mm x 304.8mm).
• Weight (approx.): Product: 85.6 lb. (38.83 kg). Shipping: 98.8 lb. (44.82 kg).
• Temperature: Operating: 0°C to 49°C (32°F to 120°F). Storage: -20°C to 70°C (-4°F to 158°F).
• Relative Humidity: 85% +/-5%.
• BTU/Hr. (approx.): 289 BTU/Hr.

Agency Listings

• CE European Conformity.
• All components of this Trove kit are UL Listed sub-assemblies. Refer to Sub-Assembly Installation Guides for details.
• UL: UL294 - Access Control System.
• CUL: CAN/ULC - s319-05 - Electronic Access Control Systems.

Wiring Diagram Overview

The provided diagram illustrates the internal layout and connections within the T3MK77F16SD kit. It shows the placement of Altronix Power Supplies, ACMS8(CB) modules with VR6 regulators mounted underneath, and PDS8(CB) modules. The diagram indicates knockouts and potential mounting locations for Mercury boards (labeled A, B, C, D) on the backplane.

Key components shown:

• Two Altronix Power Supplies.
• Two Altronix ACMS8(CB) modules, each with an Altronix VR6 mounted underneath.
• Two Altronix PDS8(CB) modules.
• Designated areas for Mercury boards (A, B, C, D).

Accessories

The following accessories can be ordered separately to enhance the functionality and management of the T3MK77F16SD kit:

• LINQ2 - Network Supervision: Altronix LINQ2 Network Communication Module for remote supervision, control, and monitoring over LAN/WAN. Reports power diagnostics, controls power, resets devices, and sends system diagnostics via email.
• WM5, WM25, WM100 - Magnetic Cable Tie Mounts: Packs of 5, 25, or 100 magnetic mounts for securing cable ties or velcro straps, ideal for wire management.
• MM4, MM8, MM12, MM24 - Magnetic Mounting Solution: Magnets designed to accommodate screws and nylon standoffs for mounting various boards and accessories in metal enclosures or backplanes.
• BR1 - Sub-Assembly Mounting Bracket: Allows mounting of specific Altronix sub-assemblies (e.g., PD4UL(CB), PD8UL(CB), ACM4(CB), MOM5, VR6, PDS8, NetWay5B, LINQ8PD(CB)) on the enclosure's inner wall to save space.
• TROVE3BWC / TROVE3SWC - Battery/Wire Trough Enclosure: Dual-purpose enclosures that can serve as wiring troughs or battery cabinets, designed to integrate with the Trove system. They feature strategically placed knockouts for easy conduit connections and include cam locks and tamper switches for security.

Dimensions and Drawing

The enclosure dimensions are approximately 36.12" (H) x 30.125" (W) x 7.06" (D), which translates to 917.5mm x 768.1mm x 179.3mm.

The drawing provides detailed measurements for knockouts and mounting points, indicating sizes for 2", 1.5", 1.25", 1", and 3/4" conduits, as well as precise spacing for board mounting.