CH-REL30-230VO + CH-R30MELVWM-230VI
Cooper & Hunter
Key Features
- Auto-Swing for horizontal louvers
- Genius Core ultra-low compressor speed of 12Hz
- 46° Freeze Protection
- Smart Kit Ready
- Turbo Mode
- Follow Me Mode
- Smart kit Included
Product Visuals
Description of indoor unit: A white, rectangular indoor air conditioning unit with the Cooper & Hunter logo.
Description of outdoor unit: A rectangular outdoor air conditioning unit with a fan grille on the front, the Cooper & Hunter logo, and various vents and connections. It is shown from the front and side.
Indoor Unit Specifications
| Specification | Value |
|---|---|
| Indoor Model | CH-R30MELVWM-230VI |
| Power Supply | 208-230V, 1Ph, 60Hz |
| Communication Wiring | AWG 14-4 |
| Cooling Capacity | 30,000 (6,800~33,900) Btu/h |
| Cooling Input | 2,500 (700~3,200) W |
| Cooling Rated Current | 11 (3.1~14.1) A |
| Cooling EER/EER2 | 11 (3.1~14.1) |
| Cooling SEER/SEER2 | [Value not explicitly stated as SEER/SEER2, but 11 is given] |
| Heating Capacity (at 47 °F) | 30,000(12,300~32,100) Btu/h |
| Heating Input (at 47 °F) | 2,900 (755~2,950) W |
| Heating Rated Current (at 47 °F) | 12.6 (4.1~13) A |
| Heating COP | 03.03 W/W |
| Heating HSPF4/HSPF2-4 | 9 |
| Heating HSPF5/HSPF2-5 | 7 |
| Indoor Fan Motor Qty | 1 |
| Indoor Fan Motor Input | 58 W |
| Indoor Fan Motor RLA | 0.7 A |
| Indoor Air Flow (Turbo/Hi/Med/Lo) | 871.1 / 647.5 / 447.3 / 329.6 CFM |
| ESP (range) | / In.wg. |
| Indoor Noise Level (Hi/Med/Lo) | 52/45/36 dB(A) |
| Dehumidification | 7.61 L/H |
| Dimensions (WxDxH) | 49.57 x 11.14 x 14.25 inch |
| Packing (WxDxH) | 52.76 x 17.72 x 15.16 inch |
| Net/Gross Weight | 43.43/56.88 lbs |
| Drainage Water Pipe Diameter | 5/8" inch |
| Refrigerant Piping (Liquid side/Gas side) | 3/8"/5/8" inch |
| Design Pressure | 550/340 PSIG |
| Controller | remote controller |
| Room Temperature Cooling | 60~90 °F |
| Room Temperature Heating | 32~86 °F |
Outdoor Unit Specifications
| Specification | Value |
|---|---|
| Outdoor Model | CH-REL30-230VO |
| Power Supply | 208-230V, 1Ph, 60Hz |
| Min. Circuit Ampacity | 28 A |
| Max. Fuse | 30 A |
| Compressor Model | KTF250D22UMT |
| Compressor Type | ROTARY |
| Compressor Brand | GMCC |
| Compressor Capacity | 27.62 Btu/h |
| Compressor Input | 2.2 W |
| Compressor Rated Current (RLA) | 17.5 A |
| Refrigerant Oil | VG74 22.7 oz |
| Outdoor Fan Motor Qty | 1 |
| Outdoor Fan Motor Input | 120 W |
| Outdoor Fan Motor RLA | 1.3 A |
| Outdoor Fan Motor Speed | 900/500 r/min |
| Outdoor Air Flow (Max) | 2,235.3 CFM |
| Outdoor Noise Level (Max) | 61.5 dB(A) |
| Throttle Type | EXV+Capillary |
| Dimensions (WxDxH) | 37.24 x 16.14 x 31.89 inch |
| Packing (WxDxH) | 42.91 x 19.68 x 34.84 inch |
| Net/Gross Weight | 142.86/154.54 lbs |
| Refrigerant Type | R454B |
| Refrigerant Precharge | 25 ft |
| Additional Charge for 1/4 inch liquid pipe | / oz |
| Additional Charge for 3/8 inch liquid pipe | 0.32 oz |
| Refrigerant Piping (Liquid side/Gas side) | 3/8"/5/8" inch |
| Max. Pipe Length | 164 ft |
| Max. Difference in Level | 82 ft |
| Ambient Temperature Cooling | -13~ 122 °F |
| Ambient Temperature Heating | -13~75 °F |
Installation Considerations
Installation Location: Select an installation location considering clearance requirements. A minimum clearance of 6 inches (15cm) is shown on the sides, with a height clearance of 4-3/4 inches (12cm) above and below. The unit should be positioned 70 inches (180cm) from the ground.
Piping Exit Options: The indoor unit mounting plate allows for four piping exit directions: left-hand side, right-hand side, left rear, and right rear. The choice depends on the wall hole position relative to the mounting plate.
Indoor Unit Dimensions: Width: 49.57 inches (1259mm), Depth: 11.14 inches (283mm), Height: 14.25 inches (362mm). The diagram also indicates a connection port width of 3.54 inches (90mm) and a connection port depth of 2.05 inches (52mm).
Wall Hole Size: When the gas side connective pipe is 5/8 inch (16mm) or more, the wall hole should be 3-1/2 inches (90mm).
Outdoor Unit Dimensions: The outdoor unit has a width of approximately 40-1/2 inches (1030mm), a depth of approximately 15-7/8 inches (403mm), and a height of approximately 31-7/8 inches (810mm). Side views show depths of 16-1/8 inches (410mm) and 17-7/8 inches (455mm) at different points. Mounting bracket dimensions are also provided.
Note: Cooper&Hunter products are subject to continuous improvements. Cooper&Hunter reserves the right to modify product design, specifications and information in this data sheet without notice and without incurring any obligations. Actual unit design may differ from images shown in this submittal sheet.
