Cooper&Hunter Air Conditioner
CH-RES09-230VO + CH-R09MOLVWM-230VI
Key Features
- Auto-Swing for horizontal louvers
- Genius Core ultra-low compressor speed of 12Hz
- 46° Freeze Protection
- Smart Kit Ready
- Turbo Mode
- Follow Me Mode
- Smart kit Included
Indoor Unit Specifications
| Specification | Value |
|---|---|
| Indoor Model | CH-R09MOLVWM-230VI |
| Power supply | 208-230V, 1Ph, 60Hz |
| Communication wiring | AWG 14-4 |
| Cooling Capacity | 9,000 (3,100~10,900) Btu/h |
| Cooling Input | 612 (210~820) W |
| Cooling Rated current | 4.6 (1.1~3.6) A |
| Cooling EER/EER2 | Btu/w |
| Cooling SEER/SEER2 | Btu/w |
| Heating at 47 °F Capacity | 10,000 (4,200~14,200) Btu/h |
| Heating at 47 °F Input | 800 (230~1,240) W |
| Heating at 47 °F Rated current | 3.6 (1.2~5.5) A |
| Heating at 47 °F COP | 3.66 W/W |
| Heating at 47 °F HSPF4/HSPF2-4 | 13 |
| Heating at 47 °F HSPF5/HSPF2-5 | 9.5 |
| Indoor fan motor Qty | 1 |
| Indoor fan motor Input | 13 W |
| Indoor fan motor RLA | 0.5 A |
| Indoor air flow (Turbo/Hi/Med/Lo) (No duct) | 382.6 / 294.3 / 194.2 / 153 CFM |
| ESP (range) | / In.wg. |
| Indoor noise level (Hi/Med/Lo) | 42/36/21 dB(A) |
| Dehumidification | 1.48 L/H |
| Indoor unit Dimensions (WxDxH) | 31.57 x 7.87 x 11.61 inch |
| Indoor unit Packing (WxDxH) | 34.45 x 11.22 x 14.96 inch |
| Indoor unit Net/Gross weight | 18.96/24.25 lbs |
| Drainage water pipe diameter | 5/8" inch |
| Refrigerant piping (Liquid side/Gas side) | 1/4"/3/8" inch |
| Design pressure | 550/340 PSIG |
| Controller | remote controller |
| Room temperature Cooling | 60~90 F |
| Room temperature Heating | 32~86 F |
Outdoor Unit Specifications
| Specification | Value |
|---|---|
| Outdoor Model | CH-RES09-230VO |
| Power supply | 208-230V, 1Ph, 60Hz |
| Min. circuit ampacity | 12 A |
| Max. fuse | 15 A |
| Compressor Model | KSK103D33UEZ3 |
| Compressor Type | ROTARY |
| Compressor Brand | GMCC |
| Compressor Capacity | 11.1 Btu/h |
| Compressor Input | 826 W |
| Compressor Rated current (RLA) | 7.3 A |
| Compressor Refrigerant oil | VG74 10.5 oz |
| Outdoor fan motor Qty | 1 |
| Outdoor fan motor Input | 34 W |
| Outdoor fan motor RLA | 0.6 A |
| Outdoor fan motor Speed | 800/700/600 r/min |
| Outdoor air flow (Max) | 1,235.3 CFM |
| Outdoor noise level (Max) | 52.5 dB(A) |
| Throttle type | EXV |
| Outdoor unit Dimensions (WxDxH) | 30.12 x 11.93 x 21.85 inch |
| Outdoor unit Packing (WxDxH) | 34.92 x 13.27 x 24.02 inch |
| Outdoor unit Net/Gross weight | 62.17/67.68 lbs |
| Refrigerant Type | R454B |
| Refrigerant Precharge | 25 ft |
| Additional charge for 1/4 inch liquid pipe | 0.16 oz |
| Additional charge for 3/8 inch liquid pipe | / oz |
| Refrigerant piping Liquid side/Gas side | 1/4"/3/8" inch |
| Refrigerant piping Max. pipe length | 82 ft |
| Refrigerant piping Max. difference in level | 49.2 ft |
| Ambient temperature Cooling | -13 ~ 122 F |
| Ambient temperature Heating | -13~75 F |
Dimensional Information
Indoor Unit
The indoor unit has dimensions of approximately 31.7 inches (806mm) in width and 11.65 inches (296mm) in height. The diagram indicates a depth of about 7.87 inches (200mm). Recommended installation clearances include 4-3/4 inches (12cm) on each side and 6 inches (15cm) above the unit. The unit offers four options for the direction of piping exit, determined by the wall hole's position relative to the mounting plate. A specific note advises that for gas side connective pipes of 5/8 inch (16mm) or larger, the wall hole diameter should be 3-1/2 inches (90mm).
Outdoor Unit
The outdoor unit has the following approximate dimensions: Width (W) 30-1/8 inches (765mm), Width 1 (W1) 32-7/8 inches (835mm), Width 3 (W3) 30-7/8 inches (784mm), Depth (D) 11-7/8 inches (303mm), and Height (H) 21-7/8 inches (555mm). Additional measurements are provided as A (17-3/4 inches / 452mm), B (11-1/4 inches / 286mm), C (12-3/8 inches / 314mm), and H2 (2-3/8 inches / 60mm). Detail A illustrates a connection point with dimensions 2-3/8 inches (61.6mm) and labels R5, A1, A2, and 10A1.
