Cooper & Hunter Air Conditioner
Model: CH-RES12-115VO + CH-R12OLVWM-115VI
Submittal Sheet
Key Features
- Auto-Swing for horizontal louvers
- Genius Core ultra-low compressor speed of 12Hz
- 46° Freeze Protection
- Smart Kit Ready
- Turbo Mode
- Follow Me Mode
- Smart kit Included
Certifications & Standards
R454B CERTIFIED | AHRI CERTIFIED | ENERGY STAR | Intertek Certified | ETL Certified | Wi-Fi Enabled | INVERTER Technology | GoldFin™ Coating | TÜV CertifiedProduct Images
Image shows the Cooper & Hunter indoor wall-mounted air conditioning unit, typically white and rectangular.
Image shows the Cooper & Hunter outdoor air conditioning unit, typically white and rectangular with a fan grille on the front.
Indoor Unit Specifications
| Specification | Value |
|---|---|
| Indoor Model | CH-R12OLVWM-115VI |
| Power Supply | 115V, 1Ph, 60Hz |
| Communication Wiring | AWG 14-4 |
| Cooling | Capacity: 12,000 (2,600~13,000) Btu/h |
| Input: 960 (180~1,080) W | |
| Rated Current: 10 (1.9~10.6) A | |
| EER/EER2: N/A Btu/w | |
| SEER/SEER2: N/A Btu/w | |
| Heating at 47 °F | Capacity: 12,000 (4,500~12,800) Btu/h |
| Input: 950 (280~980) W | |
| Rated Current: 10.3 (1.5~10.8) A | |
| COP: 3.7 W/W | |
| HSPF4/HSPF2-4: 10.4 | |
| HSPF5/HSPF2-5: 7.6 | |
| Indoor Fan Motor | Qty: 1 |
| Input: 20 W | |
| RLA: 0.6 A | |
| Indoor Air Flow (Turbo/Hi/Med/Lo) (No duct) | 370.8 / 306.1 / 235.4 / 188.4 CFM |
| ESP (range) | N/A |
| Indoor Noise Level (Hi/Med/Lo) | 40.5 / 35 / 26.5 dB(A) |
| Dehumidification | 2.54 L/H |
| Indoor Unit Dimensions | Dimensions (WxDxH): 31.57 x 7.87 x 11.61 inch |
| Packing (WxDxH): 34.45 x 11.22 x 14.96 inch | |
| Net/Gross Weight: 19.84 / 26.01 lbs | |
| Drainage Water Pipe Diameter | 5/8" inch |
| Refrigerant Piping (Liquid side/Gas side) | 1/4" / 3/8" inch |
| Design Pressure | 550 / 340 PSIG |
| Controller | Remote Controller |
| Room Temperature | Cooling: 60~90 °F |
| Heating: 32~86 °F |
Outdoor Unit Specifications
| Specification | Value |
|---|---|
| Outdoor Model | CH-RES12-115VO |
| Power Supply | 115V, 1Ph, 60Hz |
| Min. Circuit Ampacity | 18 A |
| Max. Fuse | 20 A |
| Compressor | Model: KSK103D33UEZ3 |
| Type: ROTARY | |
| Brand: GMCC | |
| Capacity: 11.1 Btu/h | |
| Input: 826 W | |
| Rated Current (RLA) | 14 A |
| Refrigerant Oil | VG74 10.5 oz |
| Outdoor Fan Motor | Qty: 1 |
| Input: 34 W | |
| RLA: 0.6 A | |
| Speed | 850 / 700 / 600 r/min |
| Outdoor Air Flow (Max) | 1,235.3 CFM |
| Outdoor Noise Level (Max) | 53 dB(A) |
| Throttle Type | EXV |
| Outdoor Unit Dimensions | Dimensions (WxDxH): 30.12 x 11.93 x 21.85 inch |
| Packing (WxDxH): 34.92 x 13.27 x 24.02 inch | |
| Net/Gross Weight: 64.59 / 70.11 lbs | |
| Refrigerant | Type: R454B |
| Precharge: 25 ft | |
| Additional Charge for 1/4 inch liquid pipe: 0.16 oz | |
| Additional Charge for 3/8 inch liquid pipe: N/A oz | |
| Liquid Side/Gas Side Piping: 1/4" / 3/8" inch | |
| Refrigerant Piping | Max. Pipe Length: 82 ft |
| Max. Difference in Level: 49.2 ft | |
| Ambient Temperature | Cooling: -13 ~ 122 °F |
| Heating: -13 ~ 75 °F |
Installation Considerations
Diagram shows a cross-section of the indoor unit with dimensions labeled: Height (H), Width (W), and Depth. It indicates a horizontal clearance requirement of 70 inches (180cm) and side clearances of 4-3/4 inches (12cm). The section is titled "Select Installation Location".
Diagrams illustrate the indoor unit's rear and side views, showing options for piping exit: Left-hand side, Right-hand side, Left rear, and Right rear.
Note: Based on the position of the wall hole relative to the mounting plate, choose the side from which the piping will exit the unit. Four options for the exit direction of the piping are available.
Note: When the gas side connective pipe is (5/8in) 16mm or more, the wall hole should be (3-1/2in) 90mm.
Diagrams provide detailed dimensions for the indoor unit: Width (W) is 31.7in (806mm), Height (H) is 11.65in (296mm). A circular opening with a diameter of 2.5in (65mm) is shown.
Outdoor Unit Dimensions
Diagrams show the external dimensions of the outdoor unit. Key dimensions include: Width (W): 30-1/8in (765mm) Width (W1): 32-7/8in (835mm) Width (W3): 30-7/8in (784mm) Height (H): 21-7/8in (555mm) Depth (D): 11-7/8in (303mm) Other labeled dimensions include A, A1, A2, B, C, H2, R5, and specific clearances like 3-5/8in (93mm), 2-3/8in (60mm), 3/4in (18mm), 3in (76mm), and 1-1/4in (32mm). A detail view (SCALE 1:2) is also shown.
Cooper&Hunter products are subject to continuous improvements. Cooper&Hunter reserves the right to modify product design, specifications and information in this data sheet without notice and without incurring any obligations. Actual unit design may differ from images shown in this submittal sheet.
