tzumi ProBuds™ Bluetooth Clip Earbuds

Product Overview

tzumi ProBuds™ HD Voice Ready Built-in Microphone. Bluetooth Clip Earbuds with remote control.

Components:

• Microphone
• Micro USB Port
• Volume Up/Next button
• Power / Multi-function button (ON/OFF, PLAY/PAUSE, Answer/End CALL, Reject CALL)
• Indicator Light
• Volume Down / Previous button

Also includes:

• Micro USB Cable
• 3 Pairs of Earbud Tips (small, medium, large)

Charging Earbuds

These earbuds have an internal rechargeable battery. The battery must be fully charged prior to use. Charging time is approximately 2 hours. Your earbuds cannot be used while charging.

Charging Indicators:

• Red light ON - Charging
• Blue light ON - Fully charged

Charging Methods:

A. Via Computer: Using the provided Micro USB cable, connect the Earbuds into the USB port on the computer or laptop.

B. Via AC Adapter Wall Charger: Using the provided Micro USB cable, connect the Earbuds into the USB port to AC Adapter Wall Charger.

Pairing Earbuds to Bluetooth Device

Make sure the Bluetooth function is available on your electronic device. Specific pairing procedures may vary slightly depending on the device. For detailed information, please refer to your device's User Guide.

• If no device connection is made within 10 minutes of the earbuds being switched on, the earbuds will automatically switch off to save power.
• After successful pairing, devices will remember each other. When turned on, no pairing will be needed next time. If reconnection failed, please follow Bluetooth step-by-step pairing instructions to reconnect.

Pairing Steps (Continued):

1. Keep the distance between the device and the tzumi earbuds within 3 feet (for pairing only).
2. Press and hold the multi-function button on the remote control until you hear the prompt "Power on" or see blue lights flashing. Keep holding for up to 4 seconds until you hear the prompt "Pairing" or see red and blue lights flashing. Activate the Bluetooth function on your device to search for Bluetooth devices. Look for and select "Tzumi-Earbuds" in the device list displayed. You will hear the voice prompt "Connected."
3. After successful pairing, the blue lights will flash quickly every few seconds. Earbuds are now ready for use.

Earbuds Controls

Listening to Music

• Play/Pause/Resume music: Short Press [circle icon]
• Go to next song: Press and hold [+]
• Go to previous song: Press and hold [-]
• Restart same song: Press and hold [-] within 5 seconds of song (by iOS system or some APP)
• Power ON/OFF: Press and hold [circle icon] for 4 seconds
• Activate/Stop SIRI during Standby/Music playing: Press [circle icon] for 1 second

Changing the Volume

When needed, adjust the volume by pressing the [up arrow] or [down arrow] keys during a call or when listening to music.

Making and Receiving Calls

• Answer/End Call: Quickly press [circle icon]
• Reject Call: Press/hold [circle icon] for 2 seconds
• Redial Last Call: Press [circle icon] 2 times
• During a call, switch from earbud to phone & back to earbud from phone: Press/hold [circle icon] for 1 second

During Incoming Call

• Mute / Unmute: Press [+] and [-] simultaneously

To Clear Any Previous Pairing

Press all 3 of these buttons ([circle icon], [-], [+]) simultaneously for 4 seconds.

Incoming Call During a Call

• Reject new call: Press/hold [circle icon] for 1 second
• Answer new call, END current call: Quickly press [circle icon]
• Answer new call, KEEP current call: Press [circle icon] 2 times
• KEEP new call to switch to call on HOLD: Press [circle icon] 2 times
• END new call, return to call on HOLD: Quickly press [circle icon]

FAQ / Troubleshooting

Q: Why do earbuds not turn on?

A: Make sure earbuds are fully charged before using it for the first time. Your device cannot be turned on if the battery level is very low. Refer to the Charging the Earbuds section of the manual.

Q: There is no sound during playback.

A: Check the Bluetooth connection between the earbuds and your device. If connection is not established, please reconnect again and adjust the volume level as needed.

Important Safeguards

• Do not use this unit for anything other than its intended use.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
• Do not expose the device to extremely high or low temperatures, as it may damage the battery.
• Do not operate the unit if it has been wet or moist to prevent against electric shock and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep the unit out of reach of children.
• This unit is not a toy.

Battery Disposal

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

Specifications