Bardi Entryway Cabinet Assembly Instructions

Introduction

This document provides assembly instructions and safety information for the Bardi Entryway Cabinet. Please take time to identify all hardware and individual components before assembly. Place contents on a carpeted or padded area to protect them from damage. Follow assembly instructions closely; improper assembly can result in personal or property damage.

For your convenience, extra hardware is included. For hardware assistance, please contact 800.606.6387.

Package Contents

Hardware:

x 04 - 3.5mm x 20mm screws
x 04 - 3.5mm x 30mm screws
x 04 - 3.5mm x 50mm screws
x 04 - 10mm x 21mm x 46mm components
x 02 - 8mm x 310mm components
x 01 - Component

Components Not Included:

(Not Included / Non Fournie / No Incluido)

Safety Warnings

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over.

To help prevent tip-over, install tip restraints per instructions. To further reduce the risk of serious injury and death from tip-overs:

Place heaviest items in the lowest compartments or drawers. Do not set heavy objects on the top of this product.
This product is not intended for use with a TV.
Never allow children to climb or hang on drawers, doors, or shelves.
Never open more than one drawer at a time.

Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.

Wall Mounting Safety

For safe mounting, it is essential to use wall anchors appropriate to your wall type (e.g., plaster, drywall, concrete). Mount to wood studs whenever possible. If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.

Assembly Steps

Step 1: Cabinet Assembly

Diagram 1 illustrates attaching internal components and shelves to the cabinet structure. Use the provided hardware and follow the visual guides for correct placement.

Step 2: Leveling the Unit

Diagram 2 shows how to level the unit if it is not stable. Adjust the feet by turning them until the cabinet is level and secure.

Wall Mounting Instructions

Diagram 4 details the process for securing the cabinet to the wall for enhanced stability and safety.

Attach the provided mounting plates to the back of the product using screws and a screwdriver.
Mark and drill holes on the wall for the mounting plates, aligning them with the cabinet's plates. Drill pilot holes into marked positions, preferably into wall studs. If wall studs are not available, drill holes slightly smaller than the drywall anchors and insert each anchor until its flange is flush with the wall.
Using a screwdriver, secure the mounting brackets to the wall stud or drywall anchors with the provided screws.
Position the product in its final location against the wall. Secure it by threading one end of the provided plastic tie through both the wall and product mounting plates, then through the other end. Pull tightly to remove slack, but do not over-tighten.

Hinge Adjustment

Diagram 5 shows how to adjust the cabinet hinges. Use a screwdriver to turn the adjustment screws to ensure doors align correctly.

Cleaning and Care

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish. Periodically check and tighten hardware as necessary.

	JB Parchemin 80" Media Console Assembly and Safety Guide \| Crate & Barrel Detailed assembly instructions, safety warnings, and care guide for the JB Parchemin 80" Media Console from Crate & Barrel. Includes multilingual support and hardware identification.
	Arden Headboard Assembly and Care Instructions - Queen/King Size Detailed assembly instructions and care guide for the Crate & Barrel Arden Headboard (Queen/King size). Includes parts list, assembly steps, and cleaning tips.
	Emmer 60-Inch Desk with Power - Assembly and Care Guide Comprehensive assembly instructions, safety guidelines, and care tips for the Emmer 60-inch desk with integrated power by Crate & Barrel. Learn how to safely assemble, mount, and maintain your furniture.
	Rayna Headboard Assembly Instructions - Crate & Barrel Detailed assembly instructions and parts list for the Crate & Barrel Rayna Headboard, including cleaning and care guidelines. Learn how to assemble your Queen or King size headboard.
	Butterfly Wall Shelf Assembly Instructions and Care Guide Detailed instructions for assembling the Crate & Barrel Butterfly Wall Shelf, including safety precautions, parts list, mounting guidance, and cleaning recommendations. Available in English, French, and Spanish.
	Opie Crib Assembly Instructions and Safety Guide \| Crate & Barrel Detailed safety warnings, assembly steps, and care instructions for the Crate & Barrel Opie Crib. Ensure safe setup and use of your baby's crib.
	Arvada Headboard Assembly and Care Instructions - Crate & Barrel Detailed assembly instructions and care guide for the Crate & Barrel Arvada Headboard. Includes hardware list, component identification, and cleaning advice for optimal product care.
	James 8-Drawer Dresser Assembly Instructions Assembly instructions and care guide for the James 8-Drawer Dresser by Crate & Barrel. Includes hardware list, assembly steps, and safety warnings.