Product Contents and Preparation
This document provides the contents list and assembly instructions for the Rayna Headboard. Please take time to identify all hardware and individual components of the product before assembly. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Please follow the assembly instructions closely, as improper assembly can result in personal or property damage.
Parts and Hardware List
Verify you have all the following items:
Hardware:
- 1x Screw (8mm x 25mm)
- 4x Washer (13mm diameter)
- 4x Washer (18mm diameter)
- 1x Hex Key (for tightening hardware)
Components:
- 1x Headboard Unit (Rayna design, curved top)
- Bed Frame Support Pieces (quantity and specific type not detailed, but implied for attachment)
Note: One component is indicated as sold separately.
[Warning Icon] Please follow assembly instructions carefully to prevent damage.
Assembly Steps
Step 1: Attach Frame to Headboard
The diagram illustrates the connection of the bed frame support structure to the headboard. This step requires using the provided hardware to secure the frame to the headboard. The diagram indicates that two sets of hardware (likely screws and washers) are used for this connection, and the hex key is used for tightening.
Procedure:
- Align the bed frame support pieces with the designated attachment points on the headboard.
- Insert screws through the frame and into the headboard.
- Place washers onto the screws and tighten securely using the hex key.
Cleaning and Care Instructions
To maintain the quality and appearance of your headboard:
- Clean surfaces using a dry or damp soft cloth.
- Avoid using abrasive cleaners.
- Periodically check all hardware and tighten as necessary to ensure stability.
