60" LED Mirror
Size: 1500*750*35MM
Product Features
This 60" LED Mirror offers a modern design with integrated Bluetooth and touch screen functionality. Key features include:
- Built-in defogger with Anti-Fog Function
- Modern Frameless Design with dimming function
- Energy-efficient LED Lighting
- Integrated Touch Screen Interface
- Bluetooth Audio Connectivity
- Digital clock and temperature display
- 5mm copper-free silver mirror for superior clarity and corrosion resistance
- Backlit 6000K LED lighting for professional-grade illumination
- UL-certified LED driver (110V) for safe, reliable operation
Diagram Descriptions:
Front View: A rectangular mirror outline, dimensions 1500mm (width) x 750mm (height). A smaller rectangle on the right indicates the 'Multi-function touch control screen'.
Side View: A thin profile showing the mirror's depth of approximately 35mm. It indicates an 'Aluminum Frame' and a 'Bluetooth speaker' mounted on the back.
Back View: The rear of the mirror, highlighting mounting brackets, the 'Defogger' unit, and the 'Bluetooth speaker'.
Quick Start Guide
- Turn OFF power at the breaker (verify with tester).
- Locate studs and mark centerline.
- Install hanging bar/brackets level.
- Make hard-wired electrical connections.
- Hang mirror; use lock-catch for horizontal mount.
- Restore power; test touch sensors (light, anti-fog, etc.).
Safety & Compliance
- Installation by a licensed electrician only.
- Connect to a GFCI-protected, properly grounded circuit (120 V~ 60 Hz).
- Do not connect to any wall dimmer (ELV/triac). Use a standard ON/OFF switch if desired; dimming happens on the mirror.
- Two-person lift required; use PPE.
- Mount into wall studs whenever possible; use proper anchors for wall type.
Symbols: ? GFCI Protected | ? No wall dimmer | ? Ground properly | ??? Two-person lift | ⛑️ PPE
What's in the Box & Tools
Included:
- Mirror assembly
- Hanging bar
- Wall screws (x2)
- Anchors (x2)
Tools Needed:
- ? Tape Measure
- ? Level
- ✏️ Pencil
- ⛑️ PPE
- ? Drill bits
- ? Electronic drill
- ? Cross screwdriver
- ? Stud finder
Hardware Instructions
Warning: Manufacturer's warranty shall be void if product is not installed by a licensed professional.
Prior to commencing installation, please ensure the following:
- The wall where the product is being installed is able to support the weight of the product.
- The main electrical supply has been powered off to complete installation.
IMPORTANT: Wiring Instructions for Canada & USA
This fixture's wiring colors may not align with standard North American guidelines. For a safe installation, please re-identify the fixture wires with electrical tape as follows:
- LIVE: Wrap black tape on the fixture's White wire. Connect this to your home's Black (Live) wire.
- NEUTRAL: Wrap white tape on the fixture's Black wire. Connect this to your home's White (Neutral) wire.
- GROUND: Connect the Green wire to your home's Green or Bare Copper ground wire.
Please consult a licensed electrician if you are unsure.
Diagram Descriptions:
Wires Diagram: Illustrates three wires: White labeled 'Live wire (White)', Black labeled 'Neutral wire (Black)', and Green labeled 'Ground wire (Green)'.
Connectors Diagram: Shows the connection points for wiring: 'Live → Live', 'Neutral → Neutral', and 'Ground → Ground'.
Important Notes:
- Hard-wire only. Do not attach a cord-and-plug.
- Use listed wire connectors; make all splices inside approved boxes.
- Do not use a wall dimmer. Use a standard ON/OFF switch if wall control is required.
Wall Mounting Instructions
Step 1: Measure the distance of the mounting hole. Drill holes with a suitable sized drill.
Step 2: Insert the anchor and mounting screw into the wall.
Step 3: Connect the mirror wires with your main wires and hang the mounting hole to the screw on the wall.
Step 4: Peel off protective film and clean the mirror with damp cloth.
Operation & Features
The mirror features a multi-function touch control screen for various operations.
Touch Button Functions:
- ↩️ Back/Menu: General navigation.
- ⬆️ Up/Next Song: Touch to play next song. Hold for 3 seconds to increase volume.
- ◀️ Previous Song: Touch to play previous song. Hold for 3 seconds to decrease volume.
- ❌ Off/Pause: Touch to turn lighting ON/OFF. Touch and hold to dim light intensity. Touch to turn defogger ON/OFF. Touch to turn Bluetooth speaker ON/OFF. Short touch controls Play and Pause functionalities.
- ? Music/Bluetooth: Controls Bluetooth speaker.
- ? Defogger: Touch to turn the defogger ON/OFF.
- ? Light: Touch to turn the lighting ON/OFF. Touch and hold to dim the light intensity.
Clock Programming: Press and hold the 'Off/Pause' button (❌) to engage the clock's program mode. In program mode, the clock cycles through 4 number fields with a 3-second break. To set the time, press the button again while the number field is flashing.
Care & Cleaning and Troubleshooting
Care & Cleaning
- ? Wipe with a soft, lint-free cloth; mild non-ammonia cleaner.
- ? Do not use abrasives, pads, acids, or solvents.
- ? Apply cleaner to cloth, not directly on sensor areas.
Troubleshooting (Quick Fixes)
- ? No light at install: Confirm breaker ON, correct wiring, internal quick-connects fully seated.
- ✋ Touch unresponsive: Power cycle at breaker for 60 seconds; clean/dry glass over sensors.
- ? Buzz/Hum: Ensure unit is not on a wall dimmer; verify solid ground.
- ⏰ Anti-fog not warming: Ensure left sensor is ON; feature auto-turns-off after 1 hour.
