LED Round Bathroom Mirror
User Manual
Product Specifications
This section details the specifications for the LED Round Bathroom Mirror.
The mirror is a round design with a slim profile, indicated as 1.14 inches thick. It features a touch button for control and LED lighting. An internal diagram shows the wiring and power supply unit located on the back of the mirror.
Accessories
The product includes accessories, with quantities specified for single mirror installations (1PCS) and dual mirror installations (2PCS).
Specifications Table
| Size | Thickness | Touch Button | LED Stripe Model | Color Temperature | Lumen | CRI | Power | Input Voltage (V) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|
| 20"X20" | 1.14" | 2 | 2835 3 colors 192LED | 3000/4000/6000 | 3088 | 90 | 24W | 120V | 4.3 |
| 24"X24" | 1.14" | 2 | 2835 3 colors 192LED | 3000/4000/6000 | 3634 | 90 | 36W | 120V | 5.5 |
| 28"X28" | 1.14" | 2 | 2835 3 colors 192LED | 3000/4000/6000 | 4388 | 90 | 36W | 120V | 7 |
| 32"X32" | 1.14" | 2 | 2835 3 colors 192LED | 3000/4000/6000 | 5090 | 90 | 36W | 120V | 8.6 |
| 36"X36" | 1.14" | 2 | 2835 3 colors 192LED | 3000/4000/6000 | 5792 | 90 | 36W | 120V | 10.5 |
| 40"X40" | 1.14" | 2 | 2835 3 colors 192LED | 3000/4000/6000 | 6570 | 90 | 48W | 120V | 12.6 |
Installation Instructions
Follow these instructions to install your LED Round Bathroom Mirror.
Method 1: Plug-in Installation
- Insert the provided plug into a standard socket. Ensure the voltage is between 110V and 120V. If the voltage exceeds 120V, a transformer is required.
Method 2: Hardwire Installation
This method requires connecting the mirror directly to your home's wiring.
Important: Disconnect power before proceeding with hardwiring.
There are two power wires behind the mirror:
- Live Wire (Typically black or dark brown)
- Neutral Wire (Typically white, red, or blue)
- Cut off the existing power plug from the mirror's cable.
- Connect the mirror's wires to the corresponding house wires (e.g., live to live, neutral to neutral). Ensure the same color wires are connected and securely tightened.
- Use a spirit level to draw a straight line on the wall to ensure the mirror is hung horizontally.
- Use an electric drill to punch four holes at the marked spots on the wall.
- Gently tap wall anchors into the drilled holes using a hammer.
- Insert screws into the wall anchors using a screwdriver.
- Hang the mirror securely onto the installed screws.
- Turn on the power supply to test the mirror.
The mirror features an anti-fog switch that automatically turns off after 1 hour and an LED light switch with a memory function for color temperature.
Troubleshooting
Refer to this section for solutions to common issues.
Warm Tips
- Upon receiving the mirror, check for any damage and ensure all accessories are present. Recheck the packing box if any items are missing.
- Before installation, test the mirror and its functions using the plug-in method.
- If the mirror does not power on, open the power supply cover on the back of the mirror. Check and tighten the power cables if they appear loose. Always disconnect power before inspecting cables.
- For any further questions or problems, please contact customer support.
Common Issues and Solutions
- LED doesn't turn on / Defogging doesn't work: Open the power box on the back of the mirror. Test the power cables and tighten them if loose. (Ensure power is disconnected first).
- Part of light strip is faulty: Gently pull the outer silicone strip away and press the inner light strip inward. If the issue persists, the light strip may need replacement.
- Light stops working after a few months: Please contact customer support for a replacement power supply.
