FRAMELESS LED MIRROR
With Front and Backlit
User Manual
Before Installation
Thank you for choosing our mirrors. To facilitate the use of our products, please read this instruction carefully before installation.
Please Notice:
- Please read all instructions carefully before assembling the item.
- After opening the package, inspect the product immediately upon receipt for transit damage or missing parts.
- Please power the mirror with the plug to test all its functions before installing on the wall.
- Assembly by two or more adults is highly recommended.
- Disconnect power before installing, adding, or changing any components.
- Ensure that the fixing location is able to take the weight of the complete fitting.
- Keep the voltages between 110V-120V. If the voltage exceeds 120V, please use a transformer.
- To connect the wires to an electrical junction box, a qualified technician or electrician is highly recommended.
Please check and make sure below functions work properly before installation ?
Diagram Description: A rectangular frameless LED mirror with a thin frame. It shows a front view with a reflective surface and a subtle outline indicating the LED lighting. There are three circular icons on the right side, representing controls: an anti-fog symbol (a cloud with a line through it), a dimming symbol (a lightbulb with a downward arrow), and a power symbol (a circle with a line).
Product Functions
Diagram Description: A diagram showing a mirror with a hanger mechanism. It also illustrates the placement of control buttons: Anti-fog switch, Dim switch, and Light switch. The mirror can be installed horizontally or vertically.
Anti-fog switch: After connecting the power, the anti-fog function is automatically turned on. If you don't need to use it, touch it to turn it off to prevent wasting energy. Defogging will take effect within 10 minutes after it's turned on and will close in 1 hour, so you can turn it on 10 minutes before taking a bath. ♨️
Dim switch: The LED light supports 10% to 100% brightness adjustment by long-pressing the button. This button has a memory function; the next time you open the mirror, it will be at the same brightness it was when last closed, meaning you don't have to adjust it each time. ?
Color temperature switch: The front and back lights have three color temperatures that can be switched (3000K/4000K/6000K) by short-pressing this button. This button also has a memory function. ?
Button Lighting Mode
| State of Button Light | Meaning |
|---|---|
| White Light ON | Function is Working |
| Blue Light ON | Function Standby |
| Light OFF | Power OFF |
Package Contents
- Bracket x2
- Wall Anchors x4
- Screws x4
- Plug
- LED Mirror
Installation tools you may need
- Level ?
- Pencil ✏️
- Hammer ?
- Safety Goggles ?
- Electric Drill ?
- Screwdriver ?
- Tape Measure ?
Mirror Dimensions
SIZE 1:
Mirror Height: 59 inches
Mirror Width: 15.35 inches
Power Cable Length: 59 inches
Power Box Dimensions: 10.24 inches (height) x 3.8 inches (width)
SIZE 2:
Mirror Height: 27.2 inches
Mirror Width: 15 inches
Power Cable Length: 59 inches
Power Box Dimensions: 15 inches (height) x 3.8 inches (width)
Note: The red line indicates the hook position, located 1.38 inches from the top edge. The location of the button is on the power box.
Product Specifications
Detailed Specifications by Size
| Size | Thickness | Touch Button | LED Strip Mode | Color Temperature | Lumen | CRI | Life Span | Power Input (W) | Output Voltage (V) | Weight (LB) |
|---|---|---|---|---|---|---|---|---|---|---|
| 28" X 20" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 4093 | ≥90 Ra | ≥50000 hours | 36 | 24V | 13.6 |
| 32" X 24" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 5067 | ≥90 Ra | ≥50000 hours | 36 | 24V | 17.4 |
| 36" X 24" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 5554 | ≥90 Ra | ≥50000 hours | 36 | 24V | 19 |
| 36" X 28" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 6042 | ≥90 Ra | ≥50000 hours | 36 | 24V | 20.3 |
| 36" X 30" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 6334 | ≥90 Ra | ≥50000 hours | 36 | 24V | 23.1 |
| 36" X 32" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 6529 | ≥90 Ra | ≥50000 hours | 36 | 24V | 24.3 |
| 36" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 7016 | ≥90 Ra | ≥50000 hours | 48 | 24V | 26.5 |
| 38" X 38" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 7601 | ≥90 Ra | ≥50000 hours | 48 | 24V | 29.7 |
| 40" X 24" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 6042 | ≥90 Ra | ≥50000 hours | 36 | 24V | 21 |
| 40" X 30" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 6821 | ≥90 Ra | ≥50000 hours | 48 | 24V | 25.6 |
| 40" X 32" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 7016 | ≥90 Ra | ≥50000 hours | 48 | 24V | 26.5 |
| 40" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 7503 | ≥90 Ra | ≥50000 hours | 48 | 24V | 29.7 |
| 48" X 30" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 7796 | ≥90 Ra | ≥50000 hours | 48 | 24V | 32.6 |
| 48" X 32" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 7990 | ≥90 Ra | ≥50000 hours | 48 | 24V | 36.2 |
| 48" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 8575 | ≥90 Ra | ≥50000 hours | 48 | 24V | 33.9 |
| 48" X 40" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 8965 | ≥90 Ra | ≥50000 hours | 60 | 24V | 42.3 |
| 55" X 30" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 8673 | ≥90 Ra | ≥50000 hours | 60 | 24V | 33.2 |
| 55" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 9403 | ≥90 Ra | ≥50000 hours | 60 | 24V | 40.4 |
| 60" X 28" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 8965 | ≥90 Ra | ≥50000 hours | 60 | 24V | 34 |
| 60" X 30" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 9355 | ≥90 Ra | ≥50000 hours | 60 | 24V | 43 |
| 60" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 9939 | ≥90 Ra | ≥50000 hours | 60 | 24V | 44.2 |
| 60" X 40" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 10426 | ≥90 Ra | ≥50000 hours | 60 | 24V | 50.5 |
| 72" X 32" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 11011 | ≥90 Ra | ≥50000 hours | 80 | 24V | 49 |
| 72" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 11498 | ≥90 Ra | ≥50000 hours | 80 | 24V | 50.1 |
| 72" X 40" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 11937 | ≥90 Ra | ≥50000 hours | 80 | 24V | 52.9 |
| 77" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 12132 | ≥90 Ra | ≥50000 hours | 80 | 24V | 56.9 |
| 84" X 32" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 12521 | ≥90 Ra | ≥50000 hours | 80 | 24V | 59.2 |
| 84" X 40" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 13495 | ≥90 Ra | ≥50000 hours | 80 | 24V | 72.6 |
| 88" X 38" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 13788 | ≥90 Ra | ≥50000 hours | 80 | 24V | 74.2 |
| 96" X 36" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 14373 | ≥90 Ra | ≥50000 hours | 100 | 24V | 88 |
| 110" X 40" | 1.14" | 3 | 2835 3 colors 192LED | 3000k/4000k/6000k | 16760 | ≥90 Ra | ≥50000 hours | 100 | 24V | 109.6 |
General Specifications
| Parameter | Specification |
|---|---|
| Switch | Touch Sensor Switch |
| LED Color Change | Yes |
| LED Dimming | Yes |
| Memory | Yes |
| Anti-fog | Yes |
| Waterproof | IP54 |
| Safety Compliance | UL |
| Glass Thickness | 5 MM |
| Glass Material | Tempered Glass |
| Cable Length | 1.5 M |
| Power Source | Hardwired / Plug in |
| Mounting Type | Wall Mounted |
| Mounting Method | French Cleat Mounting |
| Orientation | Horizontal / Vertical |
| Warranty | 3-Year Manufacturer |
Installation Instruction
Method 1: Plug in
- Step 1: Insert the plug into the socket. Keep the voltages between 110V and 120V. If the voltage exceeds 120V, please use a transformer.
- Step 2: Draw a straight line with a ruler to keep the mirror horizontal.
- Step 3: Apply wall anchors with hammer.
- Step 4: Use a screwdriver to screw the screws into the wall anchors.
- Step 5: Hang the mirror on the wall.
- Step 6: Turn on the power.
Diagram Description (Plug-in Method): Shows a plug being inserted into a socket; a ruler drawing a horizontal line on a wall; a hammer applying wall anchors; a screwdriver screwing anchors; the mirror being hung; and a power switch being turned ON.
Method 2: Hardwire
Diagram Description (Hardwire Method): Shows three power wires behind the mirror: Neutral Wire (usually white, red, or blue) and Live Wire (usually black or dark brown). The instruction is to cut the plug and connect the same color wires, tightening them. Disconnect power before hardwiring.
Steps for Hardwiring:
- Disconnect power before hardwiring.
- Cut the plug from the power cord.
- Connect the wires of the mirror to the corresponding wires in the junction box (e.g., same color to same color). Ensure connections are secure.
- Use an electric drill to punch four holes at the marked spots on the wall for mounting.
- Apply wall anchors with a hammer into the drilled holes.
- Use a screwdriver to screw the mounting screws into the wall anchors.
- Hang the mirror on the wall.
- Turn on the power at the circuit breaker.
Troubleshooting
| Issue | Solution |
|---|---|
| LED doesn't turn on / Defogging doesn't work | Open the power box on the back of the mirror and test the power cables, tighten the cables if they are loose. (Please cut off the power firstly before testing the power supply and cables). |
| Part of light strip is fault | Firstly, please pull the outer silicone strip away and press the inner light strip inward. If it still doesn't work, the strip light needs to be replaced. |
| After using for a few months, the light doesn't work. | Please contact the manufacturer to replace the power supply. |
Certifications: UL LISTED (Underwriters Laboratories) certification mark. Recycling symbol ♻️.
