Yaheetech Armchair Assembly and Care Guide
Model Numbers: 615051 / 615052
Important Information & Preparation
Please read this instruction manual carefully before attempting to install.
Assembly Recommendation: 1 or more people recommended.
Estimated Assembly Time: 1 hour.
Safety Warning: Not intended for use by children.
Safety Warning: Keep away from fire or other heat sources.
Recommendation: Wearing protective gloves is advised.
Assembly Tip: Follow the instruction manuals and use a pad to avoid damage during assembly. Protect the product and the floor during installation.
Usage: For domestic use.
Parts List
Identify all parts before assembly:
- Part 1: Backrest (x1)
- Part 2: Seat (x1)
- Part 3: Base Support (x1)
- Part 4: Left Armrest (x1)
- Part 5: Right Armrest (x1)
Hardware
- Screw A (50mm) (x10)
- Screw F (65mm) (x2)
- Washer B (x12)
- Washer C (x10)
- Washer D (x2)
- Allen Key E (x1)
Assembly Instructions
General Tightening Note: Half-tighten screws during initial assembly. Tighten all screws completely only after the entire assembly is complete.
Step 1: Attach Base Support to Seat
Combine Part 3 (Base Support) with Part 2 (Seat). Use 2x Screw F (65mm), 2x Washer D, and 2x Washer B. Half-tighten the screws.
Diagram Description: Shows the base support being attached to the seat.
Step 2: Attach Left Armrest
Attach Part 4 (Left Armrest) to the assembled base structure (Part 3). Use 5x Screw A (50mm), 5x Washer B, and 5x Washer C. Half-tighten the screws.
Diagram Description: Shows the left armrest being attached to the base.
Step 3: Attach Right Armrest
Attach Part 5 (Right Armrest) to the assembled base structure (Part 3). Use 5x Screw A (50mm), 5x Washer B, and 5x Washer C. Half-tighten the screws.
Diagram Description: Shows the right armrest being attached to the base.
Step 4: Attach Backrest
Attach Part 1 (Backrest) to the Seat (Part 2) and the Armrests (Parts 4 & 5). This step uses the remaining hardware, ensuring all connections are secure.
Diagram Description: Shows the backrest being fitted into place, connecting to the seat and armrests.
Step 5: Final Tightening
Once all parts are assembled, go back and fully tighten all screws.
Diagram Description: Shows the fully assembled armchair.
Product Care Instructions
General Cleaning:
- Use a soft, clean cloth or sponge to gently wipe the outer surface to remove dust and dirt.
- Avoid using chemical cleaners or harsh solvents to prevent damage to the appearance of the product.
Upholstery Care:
- If the product becomes stained, use a specific upholstery cleaner sprayed onto the stain.
- Gently wipe with a soft towel and avoid scrubbing vigorously to prevent pilling.
Maintenance:
- Inspect fittings (bolts, screws, nuts, etc.) every 3 months and re-tighten them every 6 months.
Environmental Factors:
- Avoid direct sunlight.
Safety Note: If the product shows structural damage or poses a safety hazard, stop using it until it is repaired.
Support and Contact Information
If you are not entirely satisfied with your purchase, please contact Yaheetech customer support:
- Go to Your Orders.
- Find your order in the list.
- Select "Problem with order".
- Choose your topic from the displayed list.
- Select "Contact seller".
US Contact:
YAHEE TECHNOLOGIES CORP
Address: 1532 S VINEYARD AVE ONTARIO CA 91761
UK Contact:
Monumart Limited
Address: Europa House, Europa Way, IP15DL, Ipswich.
German Contact (Importer):
Yahee GmbH
Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen
French Contact:
Yahee SAS
Address: 6, Place de la Madeleine, 75008 Paris.
Italian Contact:
Yahee SRL
Address: Via Generale Gustavo Fara, 26, 20124 Milano.
Download Manual
You can also download the electronic Installation Manual from the product guides and documents section of the advertising page.
Manufacturer Information:
Manufactured in PRC for Yahee GmbH
Yahee GmbH, Höpfigheimer Straße 11, 74321 Bietigheim-Bissingen
E-Mail: info@yaheetech.shop
