JLab JBuddies Studio Wireless Headphones
Your guide to setup, controls, and care.
Welcome to JLab Audio
[JLab Audio Logo]
We are pleased you chose JLab Audio to rock out! We are proud of our products and stand fully behind them.
Your Warranty
[Two Year Limited Warranty badge]
All warranty claims are subject to approval by JLab Audio and are at JLab's sole discretion. Keep your proof of purchase to claim warranty service.
Contact Us
Email: support@jlabaudio.com
Visit: intl.jlabaudio.com/contact [U.S. Based Customer Support badge]
Register Today
Visit intl.jlabaudio.com/register for product news, helpful tips, and FAQs.
First-Time Setup: Bluetooth Pairing
-
Step 1: Enable Bluetooth
Turn on Bluetooth in your device settings. [Illustration: A smartphone screen displaying Bluetooth settings with the toggle switched to ON.]
-
Step 2: Initiate Pairing Mode
When the JBuddies Studio wireless headphones are turned off, press and hold the power button for approximately 10 seconds. ⚡️ (fast blinking red and blue light) indicates it is searching for a Bluetooth device. [Illustration: The wireless headphones with the power button highlighted, displaying a fast blinking red and blue light, indicating pairing mode.]
-
Step 3: Connect Your Device
In your device settings, select 'JLab JBuddies Studio BT' to establish a connection. When the headphones are paired, you will hear two beeps and the ? (slow blinking blue light) will appear. [Illustration: A smartphone screen displaying Bluetooth settings with 'JLab JBuddies Studio BT' selected, and the headphones showing a slow blinking blue light, indicating a successful connection.]
Note on Bluetooth
- Bluetooth is a wireless radio technology, meaning it is sensitive to objects between the headphone and the connected device.
- The headphone can be used within a 10-meter (33 ft) range of a connected device without obstructions such as walls.
- Once a connection is successfully made, the headphone will remember your device and automatically pair when it is turned on.
- Only one device may be connected at a time. To pair a different device, first disconnect the current device via your Bluetooth settings.
- If the Bluetooth connection is interrupted for any reason, manually reconnect the Bluetooth device.
Charging
Connect the Micro-USB cable to a computer or a USB 5V/1A output device (or less). [Illustration: A Micro-USB cable connecting the headphones to a power source (e.g., computer or wall adapter).]
Charging Status:
- CHARGING: ? (charging)
- FULLY CHARGED: ? (fully charged)
Controls
Headphone Controls:
- Volume Up / Track Forward: 1 click
- Volume Down / Track Back: 1 click
- Power / On/Off ⚙️: Press and hold for 3 seconds (slow blinking blue light indicates headphones are on).
- Play / Pause / Answer / End Call ▶️: 1 click
- Activate Siri (iOS) or 'OK Google' (Android): 2 clicks
- Re-pair and Additional Devices: With headphones off, press and hold the power button for 10 seconds.
- Next Track / Previous Track: Press and hold for 2 seconds.
Ports:
- AUX Input / Output: For wired connections or share mode.
- Charging Port: Micro-USB port for charging.
Share Mode
Connect the included AUX CABLE to one side of another JBuddies Studio headphone or another wired headphone/earphone for share mode. [Illustration: Two pairs of JBuddies Studio headphones connected via AUX cable, or one pair connected to separate earbuds.]
Wired Connection
Connect the AUX CABLE to a device for a wired connection. [Illustration: Headphones connected via AUX cable to a smartphone.]
Caution
- ? Avoid getting moisture or liquids into the earcups.
- ☀️❄️ Avoid extreme heat, cold, and humidity.
- ⚠️ Avoid dropping or crushing the headphones, straining the cable with quick pulls or extreme force, or bending the cable at sharp angles.
- ? Earwax may accumulate in the earcups, affecting sound quality. Carefully remove earwax with a cotton swab or other small tool to improve sound quality.
- ? If you experience discomfort or pain, try lowering the volume or temporarily discontinuing use.
- ? If you regularly experience discomfort while using this product, discontinue use and consult your doctor.
- ?️ We recommend treating your headphones like a pair of sunglasses and storing them in a safe place when not in use.
More from JLab Audio
Buy Products | Product Updates | Burn-in Headphones
[Illustration: App Store and Google Play download badges.]
Download on the App Store | GET IT ON Google play
Visit: intl.jlabaudio.com
