Philips Dynalite DDRC810DT-GL Relay Controller
Designed to operate any type of switched load.
Product Overview
The Philips Dynalite DDRC810DT-GL is an eight-channel relay controller engineered to manage various types of switched loads. It is particularly well-suited for controlling bi-directional motors, such as those used in curtains and blinds. Each channel supports switched loads up to 10 A, with a maximum total load capacity for the unit capped at 40 A.
The Philips Dynalite DDRC810DT-GL relay controller is shown. It is a compact, grey, DIN-rail mountable unit. The top surface features clearly labeled terminal blocks for 'SUPPLY' and eight output channels ('CH1' to 'CH8'), along with 'DRY CONTACT INPUTS'. The front panel includes a 'SERVICE SWITCH', 'NETWORK ID' button, 'SERVICE LED', and 'SIGNAL MODES' indicators.
Key Features
- Voltage-free changeover SPDT output relays, ideal for controlling bi-directional motors.
- Flexible mounting solution: A DIN-rail mountable device designed for installation into distribution boards powering the controlled circuit.
- Inbuilt diagnostic functionality: Features circuit run time tracking for each channel.
- Standalone or networked operation: Can function as an independent unit or as part of an integrated control system via the DyNet network.
- Dry contact inputs: Receives instructions from voltage-free button presses.
Dimensions
The unit is designed for standard DIN-rail mounting.
Technical drawings illustrate the physical dimensions of the DDRC810DT-GL. The unit has a height of 93 mm (3.66 inches), a width of 215 mm (8.46 inches), and a depth of 64 mm (2.51 inches). Views from the side and top are provided, highlighting its suitability for DIN-rail mounting.
Specifications
Electrical
| Supply Type | Single-phase |
| Supply Voltage | 100-240 VAC |
| Supply Current | 0.25 A |
| Supply Frequency | 50/60 Hz |
| Outputs | 8 x switched SPDT voltage-free changeover |
| Output Channel Ratings | (See Page 4) |
| Maximum Device Load | 40 A |
| Maximum CH-CH Voltage | 400 VAC |
| DyNet DC Output Voltage | 12 VDC |
| DyNet DC Output Current | 120 mA (supports approximately 6 user interfaces) |
Control
| Serial Ports | 1 x RS485 |
| Supported Protocols | DyNet, DMX512 |
| DMX Rx Channels | 8 |
| Dry Contact Inputs | 8 + 1 (AUX) |
| User Controls | 1 x service switch, Manual override switch for each channel |
| Indicators | 1 x service LED |
Note: Snubbers/spark killers not fitted. De-rate for reactive loads. Functional isolation only between switched outputs. Do not mix SELV and non-SELV loads on the same device.
Physical
| Dimensions (H x W x D) | 93 x 215 x 64 mm (3.66 x 8.46 x 2.51 in) |
| Packed Weight | 0.54 kg (1.19 lb) |
| Construction | Polycarbonate DIN-rail enclosure (12 unit) |
| Serial Ports | 1 x 6-way pluggable screw terminal, 2 x RJ12 |
| Serial Port Conductor Size | 2.5 mm² (#12 AWG) (max) |
| Supply Terminals | Screw terminal (Line, Neutral, Earth) |
| Supply Terminal Conductor Size | 5 mm² (#10 AWG) (max) |
| Output Terminals | Screw terminal (COM, NO, NC) |
| Output Terminal Conductor Size | 5 mm² (#10 AWG) (max) |
| Maximum Dry Contact Cable Length | 20 m |
Environment
| Operating Temperature | 0° to 50°C ambient (32° to 122°F) |
| Storage/Transport Temperature | -25° to 70°C ambient (-13° to 158°F) |
| Humidity | 0 to 90% non-condensing |
| IEC Pollution Degree | II |
** For indoor installation only
Compliance
| Certification | CE, RCM, UL/cUL, FCC, UKCA, RoHS |
Output Channel Ratings
| Load Type | Maximum Rating per Output* (CH1 - CH8 N/O) | Maximum Rating per Output* (CH1 - CH8 N/C) |
|---|---|---|
| General Use | 10 A, 240 VAC | 5 A, 240 VAC |
| Incandescent | 5 A, 24 VDC | 5 A, 24 VDC |
| Electronic Driver | 1 A, 120 VAC | X |
| Motor | 9.8 FLA** (½ HP), 120 VAC 8 FLA** (1 HP), 240 VAC | X |
| TV Rating | TV-5, 120 VAC | X |
| Inrush Current | 100 A | X |
* Note Maximum Device Load and Maximum CH-CH Voltage on Pg 3
** FLA: Full Load Amps
Electrical Schematic and Connections
The device features a clear terminal layout for power, control, and output connections.
An electrical schematic diagram details the internal connections and external interfaces of the DDRC810DT-GL. It depicts the power input (100-240V AC), the eight switched outputs (CH1-CH8) with Normally Open (N/O) and Normally Closed (N/C) contacts, the DyNet RS-485 communication port (RJ12), and the Dry Contact Inputs, which are powered by a 12V DC, 120mA supply suitable for user interfaces.
Power Input: 100-240V AC, 0.25A
Output Channels: 8 channels, each with N/O and N/C terminals.
DyNet/RS-485 Port: RJ12 connector for network communication.
Dry Contact Inputs: 8 inputs plus 1 AUX input, designed for voltage-free button presses, powered by 12V DC, 120mA.
Ordering Information
| Product | DDRC810DT-GL |
| Philips 12NC | 913703035209 |
© 2023 Signify Holding. All rights reserved. Specifications are subject to change without notice.
Revision 08 2023-02-02
Website: www.dynalite.com
