IKEA Cabinet Assembly and Mounting Guide
This document provides assembly and mounting instructions for IKEA furniture components, specifically detailing the installation of cabinets and related parts.
Tools and Materials Required
Tools:
- Phillips head screwdriver
- Flathead screwdriver
- Pencil
- Knife
- Tape measure
- Saw
- Adhesive tape
Parts:
- Cabinet structure (depicted as a box)
- Side panels or finishing panels (implied by metadata and visuals)
- Mounting brackets
- Screws (Part number: 117494, Quantity: 4x)
Assembly Process
- Prepare Cabinet Components:
Begin by identifying all parts. For certain panels, measure a specific length indicated as "X cm (X/X")". Apply adhesive tape along the edge of the panel where cutting or finishing is required. Use a knife or saw to trim or cut the panel edge precisely.
- Assemble Cabinet Structure:
Assemble the main cabinet box. Attach side panels or other structural components as shown in the diagrams. Ensure correct orientation, referencing visuals that show correct and incorrect panel placement.
- Install Mounting Brackets:
Attach the metal mounting brackets to the interior sides of the cabinet. These brackets are essential for securing the cabinet to the wall.
- Secure Brackets:
Use the provided screws (Part number 117494, 4x) to firmly attach the mounting brackets to the cabinet structure. Ensure all screws are tightened securely.
- Mount Cabinet to Wall:
Position the assembled cabinet against the wall. Use appropriate wall fasteners (not detailed in this document, but implied for wall mounting) to secure the cabinet via the installed brackets. Ensure the cabinet is level and stable.
Important Notes
Refer to specific product documentation for detailed measurements and wall-specific mounting hardware. The IKEA store icon suggests seeking assistance or further information at an IKEA location.
