Allen + Roth 3-Light Vanity Light

Care and Maintenance

Shut off the main power supply before beginning any maintenance tasks. Periodically clean the fixture using a mild, non-abrasive glass cleaner and a soft cloth. Do not use solvents or cleaners containing abrasive agents, and do not spray liquid cleaner directly onto the bulb or wiring.

Questions, problems, or missing parts? Before returning, contact Lowe's at 866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday, or ascs@lowes.com.

Thank you for purchasing this Allen + Roth product. For more information, visit Lowes.com, search the item number, and refer to the Guides & Documents tab on the product's page.

Safety Information

WARNING

• Installing a fixture into an electrical system without proper grounding can lead to metal parts carrying electrical current if wires become broken, cut, or loose, potentially causing serious injury or death from electric shock.
• Wire connectors will not support the fixture's weight. Suspending the fixture by supply wires and connectors may cause it to fall, resulting in personal injury or fire hazards.

CAUTION

• Do not use bulbs with a wattage exceeding the maximum stated on the fixture, as this can increase temperatures and pose a fire risk.
• Ensure all electrical connections comply with local codes, ordinances, the National Electrical Code, and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with electrical wiring installation.
• Turn off electricity at the main fuse box or circuit breaker box before beginning installation.
• All fixtures must be mounted to an outlet box supported by the building structure. Do not attempt to support the fixture by drywall alone, as it may fall and cause personal injury.
• Do not connect the fixture's ground wire (green or bare) to the black (hot) or white (neutral) supply wire.
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Warranty

The manufacturer warrants lighting fixtures against defects in materials and workmanship for three (3) years from the date of purchase. If the product is found defective within this period, present a copy of the bill of sale as proof of purchase and the product in its original carton to the place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price. All installation and removal costs are the consumer's responsibility. This warranty does not cover defects due to misuse, accidental damage, improper handling, or installation. It specifically excludes liability for direct, incidental, or consequential damages. Some states may not allow exclusions or limitations on implied warranties, so the above may not apply. This warranty grants specific rights, and you may have other rights that vary by state.

Quick Reference Guide / Installation Overview

Preparation

Before assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not attempt assembly if any part is missing or damaged.

Estimated Assembly Time: 35 minutes

Tools Required (Not Included):

Package Contents:

• A: Fixture
• B: Mounting Bracket
• C: Mounting Screws (x2)
• H: Ground Screw

Hardware Contents:

• AA: Wire Connectors (x3)
• QQ: Screws (x2)
• F: Decorative Nuts (x3)
• G: Screws (x3)

Installation Steps:

1. Turn OFF the electrical power at the main fuse or circuit breaker.
2. Attach the mounting bracket (B) to the outlet box using screws (QQ).
3. Align mounting screws (C) on the mounting bracket (B) to ensure the fixture (A) will be level.
4. Loosen the ground screw (H) on the mounting bracket (B). Wrap the bare wire from the fixture (A) around the ground screw (H) and tighten it.
5. Connect the wires: Black fixture wire to black (hot) supply wire; white fixture wire to white (neutral) supply wire; bare/green fixture wire to bare/green (ground) supply wire. Use wire connectors (AA). If supply wire colors differ, consult a professional electrician.
6. Slide the fixture (A) onto the mounting screws (C).
7. Secure the fixture (A) using decorative nuts (F).
8. Install bulbs (not included) with a maximum of 60W each, medium-base type, into the sockets.
9. Restore power at the main fuse or circuit breaker.