Allen + Roth 2-Light Vanity Light

Care and Maintenance

Shut off the main power supply before performing any maintenance. Periodically clean the fixture with a mild, non-abrasive glass cleaner and a soft cloth. Avoid using solvents or cleaners with abrasive agents. Do not spray liquid cleaner directly onto the bulb or wiring.

Cuidado y Mantenimiento:

Antes de realizar cualquier trabajo de mantenimiento, desconecte el suministro de electricidad principal. Puede limpiar la lámpara periódicamente con un paño suave y un limpiador para vidrios suave, no abrasivo. NO utilice solventes ni limpiadores que contengan agentes abrasivos y no rocíe un limpiador de líquidos directamente sobre la bombilla o el cableado.

Customer Support

For questions, problems, or missing parts, please contact customer support before returning the product:

Phone: 866-439-9800 (8 a.m. - 8 p.m., EST, Monday - Sunday)

Email: ascs@lowes.com

Soporte al Cliente:

¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a 866-439-9800, de lunes a domingo de 8 a. m. a 8 p. m. o ascs@lowes.com.

For more information, visit www.lowes.com and refer to the Guides & Documents tab on the product page.

Safety Information

WARNING/ADVERTENCIA

• Installing a fixture into an electrical system without proper grounding can lead to metal parts carrying electrical current if wires become damaged, potentially causing serious injury or death from electric shock.
• Wire connectors are not designed to support the fixture's weight. Suspending the fixture by supply wires and connectors can cause it to fall, leading to personal injury, electric shock, or fire.

CAUTION/PRECAUCIÓN

• Do not use bulbs with a wattage higher than the maximum specified on the fixture, as this can increase temperatures and pose a fire risk.
• Ensure all electrical connections comply with local codes, ordinances, the National Electrical Code (ANSI/NFPA 70-199). Hire a qualified electrician if you are unfamiliar with electrical wiring installation.
• Turn off electricity at the main fuse box or circuit breaker box before beginning installation.
• All fixtures must be mounted to an outlet box supported by the building structure. Do not support the fixture by drywall alone, as it may fall and cause personal injury.
• Do not connect the fixture's ground wire (green or bare) to the black (hot) or white (neutral) supply wire from the outlet box.
• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Warranty

The manufacturer warrants this lighting fixture against defects in materials and workmanship for three (3) years from the date of purchase. If the product is found to be defective within this period, present a copy of the bill of sale and the product in its original packaging to the place of purchase. The manufacturer will, at its option, repair, replace, or refund the purchase price. The consumer is responsible for all installation and removal costs. This warranty does not cover defects arising from misuse, accidental damage, improper handling, or installation. It specifically excludes liability for direct, incidental, or consequential damages. Some states may not allow exclusions or limitations on implied warranties, so these may not apply to you. This warranty grants specific rights, and you may also have other rights that vary by state.

Garantía:

El fabricante garantiza que todas sus lámparas están libres de defectos en los materiales y la mano de obra por tres (3) años a partir de la fecha de compra. Si dentro de este período el producto presenta defectos, lleve una copia del recibo de venta como comprobante de la compra y el producto en su caja original al lugar donde lo compró. El fabricante, a su elección, reparará, reemplazará o devolverá el monto de la compra al comprador. Todos los costos de instalación y de extracción de la lámpara son de responsabilidad del comprador. Esta garantía no cubre lámparas dañadas debido al mal uso, daños accidentales, manipulación y/o instalación inadecuada y excluye específicamente toda responsabilidad por daños directos, accidentales o resultantes. Debido a que algunos estados no permiten exclusiones o limitaciones en una garantía implícita, las exclusiones y limitaciones anteriores pueden no aplicarse en su caso. Esta garantía le otorga derechos específicos, pero podría tener también otros derechos que varían según el estado.

Installation Overview

Preparation

Before assembly, ensure all parts are present by comparing them with the package contents and hardware lists. Do not assemble if parts are missing or damaged.

Estimated Assembly Time: 35 minutes

Tools Required (Not Included):

Package Contents

• A: Fixture (preassembled)
• B: Mounting Bracket
• H: Ground Screw
• F: Wire Connectors (x2)
• E: Mounting Screws (x3)
• QQ: Decorative Nuts (x2)
• Gx2: Decorative Screws (x2)

Step-by-Step Installation

1. Turn OFF electrical power at the main fuse or circuit breaker.
2. Mount the bracket (B) to the outlet box using mounting screws (E).
3. Align mounting screws (E) perpendicular to the horizon to ensure the fixture (A) is level.
4. Wiring:
• Loosen the ground screw (H) on the mounting bracket (B).
• Wrap the bare wire from the fixture (A) around the ground screw (H) and tighten it.
• Connect the black wire from the fixture (A) to the black (hot) supply wire using a wire connector (F).
• Connect the white wire from the fixture (A) to the white (neutral) supply wire using a wire connector (F).
• Connect the bare wire from the fixture (A) to the bare/green (ground) supply wire. If supply wire colors differ, consult a professional electrician.
5. Attach the fixture (A) to the mounting bracket (B) using decorative screws (G).
6. Install bulbs (not included) with a maximum of 60W each into the sockets.
7. Restore power at the main fuse or circuit breaker.