Care and Maintenance
Shut off the main power supply before performing any maintenance tasks. Periodically clean the fixture using a mild, non-abrasive glass cleaner and a soft cloth. Do NOT use solvents or cleaners containing abrasive agents, and do not spray liquid cleaner directly onto the bulb or wiring.
Support
For questions, problems, or missing parts, please contact Allen + Roth customer service:
Phone: 866-439-9800 (8 a.m. - 8 p.m., EST, Monday - Sunday)
Email: ascs@lowes.com
Before returning, please contact us.
For more information, visit Lowes.com. Search the item number and refer to the Guides & Documents tab on the product's page.
Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product.
WARNING
- Installing a fixture into an electrical system without proper grounding could allow metal parts to carry electrical current if wires, connections, or splices become broken or loose. Contact with the fixture could result in electrical shock, serious injury, or death.
- Wire connectors will not support the weight of this fixture. Suspending the fixture by supply wires and connectors will cause it to fall, potentially leading to personal injury, electrical shock, or fire.
CAUTION
- Do not use bulbs with a wattage greater than the maximum value stated on the fixture. Higher wattage bulbs increase temperatures and may cause a risk of fire.
- Ensure all electrical connections comply with local codes, ordinances, the National Electrical Code, and ANSI/NFPA 70-199. Hire a qualified electrician if you are unfamiliar with installing electrical wiring.
- Turn off electricity at the main fuse box or circuit breaker box before beginning installation.
- All fixtures must be mounted to an outlet box supported by the building structure. Do not attempt to support the fixture by drywall alone, as it may fall and cause personal injury.
- Do not connect the fixture's ground wire (green or bare) to the black (hot) or white (neutral) supply wire from the outlet box.
- Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
Installation Guide
Preparation
Before beginning assembly, ensure all parts are present. Compare parts with the package contents list and hardware contents list. Do not attempt to assemble, install, or use the product if any part is missing or damaged.
Estimated Assembly Time: 35 minutes
Tools Required (Not Included)
- Phillips head screwdriver
- Wire strippers/cutters
- Ladder
[Illustration of required tools: screwdriver, wire strippers, ladder]
Package Contents
- A: Fixture
- B: Mounting Bracket
- C: Hex Nuts (x2)
- D: Long Screws (x2)
- E: Short Screws (x2)
- F: Wire Connectors (x2)
- G: Mounting Screws (x2)
- H: Ground Screw (x1)
[Illustration showing all package contents labeled A through H]
Hardware Contents
- AA: Wire Connectors (x3)
- QQ: Screws (x2)
[Illustration showing hardware contents labeled AA and QQ]
Installation Overview
- Turn off power: Cut off electrical power at the main fuse or circuit breaker.
[Illustration: Hand turning off a circuit breaker switch]
- Mount Bracket: Attach the mounting bracket (B) to the outlet box using the long screws (D) and hex nuts (C). Ensure the mounting screws (D) are aligned perpendicularly to the horizon for a level fixture.
[Illustration: Mounting bracket (B) attached to outlet box with screws (D) and nuts (C)]
- Connect Ground Wire: Loosen the ground screw (H) on the mounting bracket (B). Wrap the bare wire from the fixture (A) around the ground screw (H) and tighten it to secure the wire.
[Illustration: Close-up of ground wire from fixture (A) connected to ground screw (H) on bracket (B)]
- Connect Wires: Connect the black wire from the fixture (A) to the black (hot) supply wire. Connect the white wire from the fixture (A) to the white (neutral) supply wire. Connect the bare/green ground wire from the fixture (A) to the bare/green (ground) supply wire. Use wire connectors (AA) to secure connections. If supply wire colors differ, consult a professional electrician.
[Illustration: Wiring connections showing fixture wires (black, white, ground) connected to corresponding supply wires using wire connectors (AA)]
- Attach Fixture: Secure the fixture (A) to the mounting bracket (B) using the mounting screws (G).
[Illustration: Fixture (A) being attached to bracket (B) with screws (G)]
- Install Bulbs: Install medium-base bulbs (F), 60W maximum each (not included), into the sockets.
[Illustration: Bulbs (F) being screwed into fixture sockets]
- Restore Power: Restore power at the main fuse or circuit breaker.
[Illustration: Hand turning on a circuit breaker switch]
Access Denied
Access Denied
