Armatura M2719-990-00161 Faucet Installation and Care Guide

Installation Instructions

This guide provides essential steps for the correct installation of the Armatura M2719-990-00161 faucet.

Important Note: Ensure the flexible hose is not twisted during installation.
(PL: Przyłącze elastyczne nie moze być skręcone!!! EN: Flexible hose can not be twisted!!! RU: Гибкий шланг не скручивать!!!)

Installation Steps:

• Step 1: Connect the flexible hoses to the faucet body.
• Step 2: Mount the faucet body onto the sink or countertop.
• Step 3: Secure the faucet body using the provided mounting hardware.
• Step 4: Connect the water supply lines to the flexible hoses.
• Step 5: Attach the faucet handle.

Technical Details:

• Maximum water pressure: 1 MPa (10 bar).
• Refer to diagrams for specific dimensions and clearances (e.g., minimum clearance indicated as 'min. 34' in some contexts).
• Note: Availability of certain components or features may vary by model.

Document Revision: K-MYK/01/03/2020

Warranty Terms

Armatura Kraków S.A. offers the following warranty periods for its products, commencing from the date of purchase:

• 5 or 10-year warranty: Covers leakproofness of cast components and the failure-free operation of ceramic regulators. The specific duration is indicated on the product packaging or at www.kfa.pl.
• 3-year warranty: For regulators in thermostatic mixers.
• 2-year warranty: For electronics, self-closing cartridges, rainshower sets, sliding and wall-mounted shower sets, shower switches, thin-walled spouts, and aerators.
• 12-month warranty: For all other mixer components, including seals.

The warranty is valid for hidden defects that manifest during the warranty period.

How to Claim: Report any defects at the retail point of sale or directly to the manufacturer via www.kfa.pl or the free helpline (800 433 334). Claims should be submitted within 2 months of discovering the defect.

Repair and Replacement: Armatura Kraków S.A. will address reported defects within 14 working days from the date of claim submission. The company reserves the right to determine the method of defect resolution, which may include repair or replacement with a similar model.

Warranty Exclusions: The warranty does not extend to:

• Routine maintenance, cleaning of mesh filters, or replacement of power cells.
• Damage resulting from improper storage, incorrect assembly, or misuse by the buyer.
• Damage caused by sediment or deposits from utility water on internal components.
• Mechanical surface damage reported after purchase, or surface damage caused by the use of inappropriate cleaning agents.

These warranty terms do not limit or exclude the buyer's statutory rights concerning the conformity of goods.

Proper Surface Care and Maintenance

Important: All surface finishes from Armatura Kraków S.A. are sensitive to cleaning agents containing abrasive particles, acids (particularly hydrochloric acid), solvents, or high concentrations of chlorine.

• Always check the composition and intended use of cleaning agents before application.
• Avoid using abrasive cleaning pads or brushes that can scratch or damage the product's surface.
• For chrome-plated surfaces, use mild cleaning agents such as dish soap. Rinse thoroughly with water and polish with a soft cloth.
• For the maintenance of internal faucet components, Armatura recommends using a silicone-Teflon lubricant that is certified for contact with drinking water.
• To protect the faucet from mechanical contaminants, it is advisable to install mesh filters on the water supply lines immediately before the faucet.