Installation Instructions
This document provides essential installation guidance for the Armatura M2719-990-00161 faucet model.
The installation process involves several steps, illustrated with diagrams showing various components and their assembly order. Key components are identified by numbers (1-5) and letters (A, C, D, H) in the diagrams.
Assembly Steps Overview:
- Step 1: Shows the base of the faucet and initial connections for mounting.
- Step 2: Illustrates attaching flexible hoses to the faucet body.
- Step 3: Depicts securing the faucet to the mounting surface (e.g., countertop or sink).
- Step 4: Shows connecting the flexible hoses to the main water supply lines.
- Step 5: Final assembly and connection checks are performed.
Important Warnings and Specifications:
- A critical warning states: "Flexible hose can not be twisted!!!" (EN). Ensure hoses are not kinked or twisted during installation.
- The maximum operating water pressure is indicated as "max: 1 MPa".
- Diagram A shows a recommended measurement range, likely for the installation hole size or required clearance, with values "min. 34 mm" and "max. 45 mm".
Guarantee Terms
Armatura Kraków S.A. provides the following warranty periods for its products, calculated from the date of purchase:
- 5 or 10-year warranty for the leakproofness of cast components and the failure-free operation of ceramic regulators. The specific period depends on information provided on the packaging and the manufacturer's website.
- 3-year warranty for regulators in thermostatic mixers.
- 2-year warranty for electronics, self-closing cartridges, rainshower sets, sliding and wall point shower sets, shower switches, thin-walled spouts, and aerators.
- 12-month warranty for other mixer components, including seals.
The warranty covers hidden defects that become apparent during the warranty period. Complaints must be reported to the point of sale or the manufacturer (via www.kfa.pl or helpline 800 433 334) within 2 months of discovering the defect.
Armatura Kraków S.A. reserves the right to choose the method of defect removal or to replace a defective mixer with a new one of the same or a similar model if repair deadlines are not met. Repair or replacement is typically completed within 14 working days of reporting the defect.
Warranty claims are valid only upon submission of proof of purchase along with a correctly completed warranty card.
Warranty Exclusions:
- Maintenance of the fitting, cleaning of mesh filters, and replacement of power cells are not covered.
- Damage caused by the buyer due to improper storage, faulty assembly, or incorrect use is excluded.
- Damage caused by deposits from utility water on the mixer's structural components is not covered.
- Mechanical damage to the mixer surface reported after purchase, and surface damage resulting from cleaning with inappropriate agents, are not covered.
The warranty granted by Armatura Kraków S.A. does not exclude, limit, or suspend the buyer's rights arising from the non-conformity of the goods with the contract.
Principles of Proper Surface Care
Note: All surface finishes used by Armatura Kraków S.A. are sensitive to cleaning agents containing abrasive ingredients, acids (particularly hydrochloric acid), solvents, high concentrations of chlorine, or other aggressive chemicals that can react with the surface.
Before using any cleaning agent, please carefully read its composition and intended use.
Do not use sharp scrub pads or brushes that could scratch or damage the product's surface.
For chrome surfaces: clean with mild cleaning agents (such as dishwashing liquid), then rinse with water and polish with a soft cloth.
For maintaining internal components: silicone-Teflon lubricant approved for contact with drinking water is recommended.
To protect the faucet from mechanical contaminants, it is recommended to install mesh filters on the water installation directly before the faucet.
