Armatura Kraków SA

Installation Diagram Description

The primary diagram illustrates the assembly of the Armatura M2719-990-00163 mixer. It shows a wall-mounted mixer body with connections for hot and cold water. Key components include a control knob (labeled 'C' for flow/temperature) and a lever handle (labeled 'H' for on/off). The diagram indicates dimensions such as 220mm, 150mm, and 73mm. It suggests using "Teflon" tape for sealing threaded connections and "Silicone" sealant for waterproofing. A quantity of "4x" is noted, likely referring to mounting screws or fixings. Smaller illustrations depict alternative mixer configurations and a shower head with a 360° rotation capability.

Warranty Terms

Manufacturer: Armatura Kraków S.A., ul. Zakopiańska 72, 30-418 Kraków.

Warranty Periods:

• 5 or 10-year warranty for leakproofness of cast components and ceramic regulators (check packaging/website).
• 3-year warranty for regulators in thermostatic mixers.
• 2-year warranty for electronics, self-closing cartridges, rainshower sets, sliding/wall point shower sets, shower switches, thin-walled spouts, and aerators.
• 12-month warranty for other mixer components, including seals.

Coverage: Hidden defects disclosed during the warranty period.

Reporting Claims: Report to the retail point of sale, manufacturer via www.kfa.pl, or the helpline (800 433 334) within 2 months of defect discovery.

Repair/Replacement: Armatura Kraków S.A. reserves the right to choose the method of defect removal or replacement. Repairs/replacements are completed within 14 working days of reporting.

Requirements: Proof of purchase and a correctly filled warranty card are required.

Storage Conditions: Mixers must be stored in dry rooms (humidity ≤ 70%, temperature ≥ 0°C) away from corrosive chemicals.

Exclusions:

• Fittings maintenance, mesh filter cleaning, power cell replacement.
• Damage due to improper storage, assembly, or use.
• Damage from water deposits on structural components.
• Mechanical surface damage reported after purchase or damage from improper cleaning agents.

Consumer Rights: The warranty does not exclude or limit statutory consumer rights.

Principles of Proper Surface Care

Caution: Surfaces are sensitive to abrasive cleaning agents, acids (especially hydrochloric acid), solvents, high concentrations of chlorine, and other aggressive chemicals.

Cleaning:

• Read cleaning agent composition and intended use carefully before use.
• Do not use abrasive scrub pads or brushes that can scratch or damage the surface.
• Clean chrome surfaces with mild agents (e.g., dishwashing liquid).
• Rinse with water and polish with a soft cloth.

Maintenance: Silicone and Teflon lubricants approved for contact with drinking water are recommended for internal components.

Protection: Install mesh filters on water installations before the mixer to prevent mechanical contaminants.