Dr. Brown's Soft Spout Transition Cup
Read and save these instructions for future use.
Before First and Each Use
Before first use, fully disassemble all parts, wash the product, and then place the components in boiling water for five minutes. This is to ensure hygiene.
To prevent a possible choking hazard, pull on the valve in all directions before each use to ensure it does not tear. Inspect carefully, especially when the child develops teeth.
Discontinue use and replace the valve immediately if any signs of wear or damage are visible, such as cracking or change of shape. Small pieces can accidentally be inhaled and cause serious injury.
Cleaning
Fully disassemble all parts and wash prior to each use.
Safe for use in dishwasher (top rack only), electric sterilizer, microwave sterilizer, or boiling water.
Assembly & Use
Install the valve onto the underside of the cap by pressing firmly into place, making sure edges are snapped all around.
If your cup has removable handles, assemble handles with cap before tightening onto cup.
Fill cup with liquid and tightly screw cap onto cup.
For Your Child's Safety and Health
WARNING!
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Throw away at the first signs of damage or weakness.
- Keep components not in use out of the reach of children.
- Never attach to cords, ribbons, laces, or loose parts of clothing. The child can be strangled.
- Never use valve as a pacifier/soother.
- Always use this product with adult supervision.
- Do not use a microwave oven to heat the cup as microwave ovens can create hotspots in the cup, contents, and/or components.
- Do not leave the valve in direct sunlight or heat, or leave in disinfectant (sterilizing solution) for longer than recommended as this may weaken the valve.
- Do not allow a child to walk or run while using any cup.
- Do not let a child take a cup to bed or self-feed for long periods.
