HOMCOM 831-664V00_831-664V01_831-664V81 Nightstand Assembly Instructions

Step 1: Prepare Panels

Identify the exact hole for installation. Ensure drawer slides are leveled for smooth operation.

Visual description: Shows two panels with pre-drilled holes. Indicates "THIS HOLE" for precise alignment. Shows drawer slides being attached to panels using screws.

EN: Please find the exact hole for installation, otherwise it will be misaligned. The screws on the drawer slide must be leveled, otherwise it will affect the smoothness of the drawer.

Step 2: Attach Cam Lock Bolts

Insert cam lock bolts (A) into the designated holes on panels (2) and (12).

Visual description: Shows panel (2) and panel (12) with cam lock bolts (A) being screwed in. An inset shows a close-up of a cam lock bolt being inserted and tightened.

Step 3: Connect Side Panels to Bottom Panel

Attach side panels (2) to the bottom panel (9) using cam lock bolts (A) and cam lock nuts (B).

Visual description: Shows side panels (2) being attached to the bottom panel (9). Cam lock bolts (A) are inserted, and cam lock nuts (B) are used to secure them. An inset shows the cam lock mechanism.

Step 4: Attach Drawer Slides to Side Panels

Attach the cabinet part of the drawer slides (11) to the side panels (2) using screws (C).

Visual description: Shows drawer slides (11) being attached to the inner sides of panels (2) using screws (C).

Step 5: Attach Legs

Attach leg mounting plates (H) to the bottom panel (9) using screws (I). Then screw in the legs (10).

Visual description: Shows leg mounting plates (H) being attached to the bottom panel (9) with screws (I). Legs (10) are then screwed into the plates.

Step 6: Assemble Cabinet Frame

Connect the back panels (3) to the side panels (2) and bottom panel (9) using screws (D) and cam lock nuts (B).

Visual description: Shows back panels (3) being attached to the partially assembled frame. Screws (D) and cam lock nuts (B) are used for connection.

Step 7: Insert Drawer Slide Supports

Insert dowels (E) into the designated holes on the back panels (3). Attach drawer slide brackets (K) using screws (F).

Visual description: Shows dowels (E) being inserted into the back panels. Drawer slide brackets (K) are then attached with screws (F).

Step 8: Attach Top Panel

Place the top panel (1) onto the assembled frame and secure it using cam lock bolts (A) and cam lock nuts (B).

Visual description: Shows the top panel (1) being placed on the cabinet structure. Cam lock bolts (A) and nuts (B) are used to fasten it.

Step 9: Assemble Drawers

Assemble the drawer boxes using drawer sides (5), drawer back (6), and drawer bottom (7). Attach drawer front (4) using cam lock bolts (A) and cam lock nuts (B). Attach the drawer part of the drawer slides (12) to the drawer sides using screws (J).

Visual description: Shows the assembly of drawer boxes. Drawer sides (5), back (6), and bottom (7) are joined. Drawer front (4) is attached with cam lock hardware. Drawer slides (12) are attached to the drawer sides with screws (J).

Step 10: Insert Drawers

Carefully push the assembled drawers into the cabinet, ensuring the drawer slides align correctly.

Visual description: Shows the assembled drawers being inserted into the cabinet. An arrow indicates the direction of insertion. An inset shows a close-up of the drawer slide alignment.

EN: Be careful to push in the board when the both sides slide way been aligned.

Step 11: Attach Ventilated Back Panel

Attach the ventilated back panel (8) to the rear of the cabinet.

Visual description: Shows the ventilated back panel (8) being attached to the back of the assembled nightstand.

Step 12: Final Check

Ensure all connections are secure and the drawers operate smoothly.

Visual description: Shows the completed nightstand with drawers inserted.

Step 13: Final Assembly

This step confirms the completed assembly.

Visual description: Shows the completed nightstand from a different angle.