HOMCOM 831-650V81 / 831-650V90 Nightstand Assembly Instructions
Model Numbers: 831-650V81, 831-650V90
Important Information
Please retain this manual for future reference. Read carefully.
Icons used in this manual:
- Hammer [hammer]
- Drill [drill]
- Screwdriver [screwdriver]
- Clock [60 min]
- People [people]
Contact Information
Our contact details are below:
Country | Phone | |
---|---|---|
UK | 0044-800-240-4004 | enquiries@mhstar.co.uk |
DE | 0049-(0)40-88307530 | service@aosom.de |
FR | 0033-1-84166106 | aosom@mhfrance.fr |
ES | 0034-931294512 | atencioncliente@aosom.es |
PT | 0034-931294512 | info@aosom.pt |
IT | 0039-0249471447 | clienti@aosom.it |
US | 001-877-644-9366 | customerservice@aosom.com |
CA | 416-792-6088 | customerservice@aosom.ca |
Assembly Guidance
Cam Lock and Quickfit
Quickfit Installation: Tighten the quickfit until its shoulder is flush with the panel. Do not overtighten or undertighten.
Cam Lock Installation: When fitting the cam lock, ensure the starting position is correct before inserting the connecting quickfit. The cam lock head should be in the center of the cam lock when the two panels are joined. The cam lock should be inserted before the quickfit. Turn the cam lock clockwise to tighten.
Drawer Runner Installation
Pull inner and outer drawer runners apart until the drawer lock is visible. Press and hold the drawer runner lock, then continue to slide the runners apart. Your inner and outer drawer runners are now ready to be fixed to panels.
Parts List
Refer to the explosion figure for part identification.
- Part 1: Top Panel (x1)
- Part 2: Base Panel (x1)
- Part 3: Left Side Panel (x1)
- Part 4: Drawer Front Panel (x2)
- Part 5: Drawer Side Panel (x2)
- Part 6: Right Side Panel (x1)
- Part 7: Back Panel (x1)
- Part 8: Drawer Bottom Panel (x2)
- Part 9: Drawer Back Panel (x2)
- Part 10: Drawer Runner (Outer) (x2)
- Part 11: Drawer Runner (Inner) (x2)
- Part 12: Drawer Runner (Outer) (x1)
- Part 13: Drawer Runner (Outer) (x1)
- Part 14: Drawer Side Panel (x2)
- Part 15: Drawer Front Support (x2)
- Part 16: Drawer Runner (Inner) (x1)
Hardware List
- Hardware A: Cam Dowel (x24)
- Hardware B: Wooden Dowel (x20)
- Hardware C: Cam Lock (x11)
- Hardware D: Screw (M1) (x2)
- Hardware E: Screw (M2) (x4)
- Hardware F: Screw (Ø4*25) (x8)
- Hardware G: Drawer Runner Bracket (x2)
- Hardware H: Screw (Ø3.5*14) (x20)
- Hardware I: Screw (Ø3.5*35) (x8)
- Hardware J: LED Strip (x1)
Assembly Steps
Step 01:
Attach drawer runners (part 15) to side panels (parts 4 and 5) using screws (part D) and cam dowels (part A). Ensure correct orientation.
Step 02:
Attach drawer runners (part G) to top panel (part 1) and base panel (part 2) using screws (parts A, B, H). Ensure correct orientation.
Step 03:
Connect side panels (parts 3, 4, 5) to the back panel (part 7) using screws (part A).
Step 04:
Attach the base panel (part 2) to the assembled side and back panels using screws (part A, B).
Step 05:
Attach the top panel (part 1) to the assembled structure using screws (part A).
Step 06:
Insert drawer front supports (part 15) into the main unit using screws (parts A, H).
Step 07:
Attach drawer runners (parts E, F) to the drawer side panels (parts 5, 14) using screws (parts E, F).
Step 08:
Assemble the drawers: Attach drawer runners (parts 10, 11, 12, 13, 16) to drawer side panels (parts 5, 14) and drawer back panels (part 9) using hardware B, D, H, I. Slide drawer bottom panel (part 8) into the grooves. Attach drawer front panels (part 4).
Step 09:
Connect the LED strip pin and power adapter to the RGB control box. Remove the battery protection pad from the remote controller. Align the remote controller to the RGB control box to adjust the color mode. Battery specification: CR2025 3V.
Importer Information
US: Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. MADE IN CHINA.
CA: Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. MADE IN CHINA. Importé par Aosom Canada Inc., 7270 Woodbine Avenue, unité 307, Markham, Ontario Canada L3R 4B9. Fabriqué en Chine.
UK: IMPORTER ADDRESS: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH. MADE IN CHINA.
FR: ADRESSE D'IMPORTATION: MH FRANCE, 2 Rue Maurice Hartmann 92130 Issy Les Moulineaux France. FABRIQUÉ EN CHINE. Recycling advice: Pensez à donner ou recycler. [recycling symbol] Association Magasin Déchèterie https://quefairedemesdechets.fr
ES: IMPORTADOR: SPANISH AOSOM, S.L., C/ROC GROS, Nº15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. WWW.AOSOM.ES. ATENCIONCLIENTE@AOSOM.ES. TEL: 931294512. HECHO EN CHINA.
PT: SPANISH AOSOM, S.L, C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ. TEL: 931294512 (SEG-SEX DAS 7:30H ÀS 16:30H). INFO@AOSOM.PT. WWW.AOSOM.PT.
DE: ADRESSE DES IMPORTEURE: MH Handel GmbH, Wendenstraße 309 D-20537 Hamburg Germany. IN CHINA HERGESTELLT.
IT: IMPORTATO DA: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1 20057 Assago (MI). P.I.: 08567220960. FATTO IN CINA.