Pelonis Owner's Manual

Service & Support

For warranty claims or service, contact Pelonis:

• Toll Free: 1-866-646-4332
• Email: customersupport@pelonis.com

For questions or comments, write to:

Midea America Corp.
759 Bloomfield Ave., #386
West Caldwell, NJ 07006-6701

For your records, staple your sales receipt here:

DATE OF PURCHASE: _________________________

PLACE OF PURCHASE: _________________________

(STAPLE SALES RECEIPT HERE)

NOTE: PROOF OF PURCHASE IS REQUIRED FOR ALL WARRANTY CLAIMS. PRINTED IN CHINA.

One (1) Year Limited Warranty

Pelonis warrants this product to be free of defects in material and workmanship for one (1) year from the original purchase date. This warranty covers heating elements, motor, and electric control circuit board.

To claim warranty service, deliver or send the heater, postage prepaid, along with PROOF OF PURCHASE, to Pelonis within the one (1) year warranty period. Pelonis will inspect the claimed defective part and, at its option, repair or replace it free of charge within sixty (60) days of receipt.

This warranty applies only to defects arising from normal usage. It does not cover malfunctions or failures due to:

• Misuse, negligence, physical damage, or accidents.
• Lack of proper maintenance.
• Repair by unauthorized parties.
• Damage caused by connection to improper input voltage (refer to specification label).

Pelonis makes no other warranties, express or implied. No representative or dealer is authorized to assume other liabilities. Implied warranties of merchantability and fitness for a particular purpose are limited to the duration of this express warranty. Pelonis is not liable for direct, indirect, special, or consequential damages.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Warranty Extension Offer: Get a free 3-month extension of the original limited warranty period by texting a picture of your proof of purchase to 1-844-224-1614.

Important Instructions

Please read and save these important safety instructions. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons:

1. Read all instructions before using the heater.
2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving. Keep combustible materials (furniture, pillows, bedding, papers, clothes, curtains) at least 3 feet (0.9m) from the front, sides, and rear of the heater.
3. Extreme caution is necessary when the heater is used by or near children or invalids, and whenever it is left operating unattended.
4. Always unplug the heater when not in use.
5. Do not operate any heater with a damaged cord or plug, or after the heater malfunctions, has been dropped, or damaged. Return it to an authorized service facility for examination or repair.
6. Do not use the heater outdoors.
7. This heater is not intended for use in bathrooms, laundry areas, or similar moist indoor locations. Never locate it where it may fall into a bathtub or other water container.
8. Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or similar coverings. Do not route the cord under furniture or appliances. Arrange the cord away from traffic areas where it will not be tripped over.
9. CAUTION: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug does not fit fully, reverse it. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
10. This heater draws 12.5 amps during operation. To prevent overloading a circuit, do not plug it into a circuit that already has other appliances working.
11. CAUTION: It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlets.
12. To disconnect, turn controls to OFF, then remove the plug from the outlet. Never pull by the cord.
13. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause electric shock, fire, or damage the heater.
14. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
15. The heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
16. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
17. CAUTION: Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or power tap (outlet/power strip).
18. The output of this heater may vary, and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns.
19. CAUTION: To prevent electric shock, match the wide blade of the plug to the wide slot and fully insert.

"SAVE THESE INSTRUCTIONS"

Operating Instructions

Check before turning on the machine:

1. Check if the power wire is in good condition.
2. The product uses a 120V AC power supply. Before use, confirm that the rated current of the power socket meets local requirements and has a safe grounding device. If not, replace it with a qualified socket.

Put the machine on the flat place:

An uneven place may cause the tip-over switch to be in an abnormal position, preventing the heater from working. Therefore, place the heater on a flat surface, ensuring at least the base of the heater rests on a flat area.

Temperature Control Knob:

Insert the plug into the power socket. Turn the Temperature Control knob clockwise until you hear a "click" (indicating the temperature controller is on). Adjust the knob to the desired temperature level.

Power Selection Knob:

Turn the Power Selection knob to select one of four functions: Low 900W (LOW), High 1500W (HIGH), Low 900W Swing (LOW SWING), or High 1500W Swing (HIGH SWING).

Turn off the Heater:

1. Turn the Power Selection knob to the OFF position.
2. Turn the Temperature Control knob anticlockwise to the initial position.
3. Remove the power plug. Store the heater after the entire machine has cooled down.

Safety Protection

• Overheat Protection: If the internal temperature becomes too high due to abnormal use or environment, the thermostat device will automatically cut off power. Unplug the heater, allow it to cool completely, then plug it in again to resume normal operation.
• Inversion Protection: If the heater is tipped over, the safety system will automatically cut off power. The heater will return to its working state after being placed upright again.

Tip-over switch:

As a safety measure, the unit will shut off automatically if knocked over. If this occurs, turn the heater OFF, stand it upright, and then switch it back ON.

Main Technology Specifications

Troubleshooting

If the product does not operate or does not operate properly, check the following list. If the cause is not listed or the problem persists, contact the dealer or the service center.

Cleaning and Storage

It is recommended that the heater be cleaned at least once during the operating season for optimal performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING.

1. Turn the heater "OFF," unplug it, and wait for it to cool down completely.
2. Use a dry cloth to clean only the external surfaces of the heater.
3. Do not use any cleaning agents or detergents.
4. Never immerse the heater in water.
5. Pack the heater in the original carton and store it in a cool, dry place.