Pipishell Utility Cart Instruction Manual

Contents

• Basket [A] x 4
• Leg [B1] x 2
• Leg [B2] x 2
• Handle [C] x 2
• Side Pole [D] x 12
• Screw [E] x 19
• Caster with Lock [G1] x 2
• Caster without Lock [G2] x 2
• Phillips Screwdriver [H] x 1
• Wrench [I] x 1
• Cup [J] x 4
• Hook [L] x 4

Installation

Step 1:

Connect the legs [B1] and [B2] together, but do not screw in screws yet. Insert the assembled legs [B1] and [B2] into the basket [A] from the bottom of the basket [A], then tighten the screws [E]. Ensure the legs are installed as tightly as possible against the basket.

Diagram description: Shows connecting two leg pieces (B1, B2) and then attaching them to the bottom of a basket (A) using screws (E) and a screwdriver (H).

Step 2:

Insert four side poles [D]. Align the holes of the side poles [D] with the holes on the legs [B1] and [B2], then secure them with the screws [E]. Ensure the side poles are installed as tightly as possible against the basket.

Diagram description: Shows inserting four side poles (D) into the assembled legs (B1, B2) of the first basket (A) and securing them with screws (E) using a screwdriver (H).

Step 3:

Slide the basket [A] onto the poles already attached. Then, insert four more side poles [D]. Align the holes of the upper poles with the holes on the lower poles, then secure them with the screws [E]. Ensure the side poles are installed as tightly as possible against the basket.

Diagram description: Shows sliding a second basket (A) onto the side poles (D) of the first tier and then attaching four more side poles (D) to this new basket, securing them with screws (E).

Step 4:

Repeat step 3 to install two more tiers. Then, secure the handles [C] by aligning the screw holes and tightening the screws [E]. Attach the casters [G1] (with lock) and [G2] (without lock), hooks [L], and cups [J].

Diagram description 4-1: Shows attaching handles (C) to the top of the cart using screws (E) and a screwdriver (H).

Diagram description 4-2: Shows attaching casters with lock (G1) and without lock (G2) to the bottom legs. It also indicates that if the cart is unlevel, the casters can be adjusted using a wrench (I) for leveling.