About This Manual
This document provides detailed instructions for the installation and use of the Pipishell PIMFK3 Full Motion TV Wall Mount. Please read all instructions carefully before beginning the installation process.
Key Features
The Pipishell PIMFK3 is designed to securely hold TVs ranging from 26 to 60 inches, supporting VESA patterns up to 400x400mm and a weight capacity of 77 lbs. It offers full motion capabilities, including swivel, tilt, and level adjustments for optimal viewing angles.
Important Safety Information
Safety First: Always prioritize safety during installation. Ensure the wall construction is suitable and capable of supporting the weight of the TV and mount. Avoid potential personal injuries and property damage by following all warnings and cautions outlined in this manual.
Weight Capacity: Do not exceed the maximum weight limit of 77 lbs (35kg). Using the mount with heavier products may lead to failure and potential injury.
Wall Compatibility: This mount is designed for installation into wood studs, solid concrete, concrete block, or brick walls. DO NOT install into drywall alone.
Installation Overview
The installation process involves several key steps:
- Verifying TV VESA pattern and wall construction.
- Gathering necessary tools and supplied parts.
- Attaching the TV brackets to the TV.
- Securing the arm assembly/wall plate to the wall (wood stud or solid wall installation).
- Mounting the TV onto the wall plate.
- Performing level and tilt adjustments.
Support and Resources
For technical assistance or if you have any questions or concerns, please contact Pipishell customer support:
- US/CA: 1-800-556-9829 (Mon-Fri 8am - 8pm CST)
- UK: 44-808-196-3885 (Mon-Fri 2pm – 10pm UTC)
- Email: support@pipishell.net
- Website: www.pipishellav.com
